Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Rendering Machines

new technology wall plastering machine, cement plastering machine for wall, india wall plastering machine - details see: https://www.machineto.com/high-quality-hot-sale-factory-new-technology-wall-plastering-machine-10114263

High Quality, Hot Sale, Factory Automatic wall rendering machine, new technology wall plastering machine

1, Technical data:

Model	ZKRM-800	ZKRM-1000	ZKRM-1200
Plastering capacity	550-600 m2	600-650 m2	650-700 m2
Voltage	380v/220v	380v/220v	380v/220v
Total power	1.5-2.2kw	1.5-2.2kw	1.5-2.2kw
Plastering depth	2-25mm	2-25mm	2-25mm
Plastering height	4000mm	4000mm	4000mm
Plastering width	800mm	1000mm	1200mm
Weight of machine	260kg	280kg	300kg
Dimension(mm)	1110*800*500	1110*1000*500	1110*1200*500
Delivery	After receipt of payment
Payment	100% before shipment
Warranty	12 months
After Sales Service	Technic Support and Spare Parts

2, Characteristics:

1. New machine instead of handmade in construction plastering area.
2. The capacity is as 15 professional plasterers.
3. The quality is subject to international wall plastering standard.
4. Easy and simple operation
5. Saving more than 20% raw material (cement &sand)

6. Plaster the wall automatically and go up and down automatically.

7. Just only plaster one-time.The thickness of the ash can be adjusted.

8. Easy to move, without removing any parts of the machine.

9. Large capacity hopper,you can put the ash/lime/gypsum in it one-time.

10. One or two person can operate.

11. Leakage protection device with high sensitivity, suitable

3, Introduction:

The machine has solved the defect that previous machines cannot render the top of the wall. It takes only several seconds to fix the machine vertically and flatly and less one minute from the bottom to the top of the wall. Besides, if two people operate the machine, they can render ten rooms (400 sq) in 8 hours. It can use all ashes including white ash, cement, 116 ash, 139 ash and plaster. The machine uses vibrations-plastering and the thickness can be 2.5 cm at a time without hollowness and cracks and shrinking. Catching wall force is far better than manpower.

Advantage 1,the machine uses the hydraulic ram. Therefore, it can be fixed fast and takes only about ten seconds and solves the problem that the machine cannot be fixed stably.

Advantage 2,the machines uses the gridiron and combines with the traditional RBI. Therefore, it has settled the problem that the laser fixes the position slowly and hardly and inaccurately.

Advantage 3,the machine can convey the ash forward and up by using the conveyor belts and combines with big plate that can change the angle. Therefore, it can render the top of the wall without leaving 1 mm.

Advantage 4,by using vibrators to increase the plate, the machine has solved the problem that rendering the wall by people easily brings about the hollowness and cracks. The maximum thickness can up to 3cm as to the bibulous wall. The minimum thickness can be 0.3 cm.

Advantage 5,by using the plate that can change the angle, the machine has solved the problem that previous machines cannot go down.

Advantage 6,by using the inserted-bar, the machine can be docked more conveniently according to the height and has solved the problem that the retractable spear cannot cross the construction hole. Besides, it can be used immediately without assembling. After disconnecting the upright stanchion, the machine can be transported without disassembly.

Advantage 7,the plastering width of the machine is 80 cm. As for 20 cm, 30 cm, 50 cm, the only thing you should do is to fill in one side without adjusting and blocking. It is impossible to adjust and block the machine for it has been in the sand for a long time.

Advantage 8,the conveyor belt of machine can be stopped alone. For example, if the conveyor crosses the construction hole, then, the machine can continue to render the wall.

Advantage 9,by using the necessary limit clamp and making it as high as lintel, the machine can render the wall below the lintel. At the same time, by using the hands to press the two tails bar that can change the angel of the plate to the window, the machine can render the wall below the window.

Advantage 10,the width of plate is wider than machine. Therefore, the angel of yin and yang are very easy to be rendered.

Measures for protection:

(1).before the plate doesn’t change into the angel for rendering the wall, if you turn on the machine, it will not rise and avoid damaging the plate.

(2).if the machine renders the top of the wall, for example, some stones on wipe mouth, the plate does not reach the designated position, it will not damage any parts because of the protection of the gas spring. What’s more, if the machine is locked, it will stopped automatically and the wire rope will not be in disorder.

(3). Breaking the rope for protection. Whichever the rope is broken, the machine will be locked after moving 10 cm fast to avoid falling down the ground. Turn on the machine again, it will go down.

(4). Reversal protection. If the power is connected oppositely, the machine will cut off the machine automatically within one second. Change the wrong connection, the machine will function again.

(5). the machine is designed reasonably. Even if hydraulic system is damaged , the machine will go up, not backward.

(6). machine overload protection: if the machine is locked when going up, it will stop automatically.

Other features

(1). changing the rope is very convenient. Under the conditions of electricity, if you lift the two wire rope with your hands, how many you lift, how many it will give. If the wire rope is not long enough, you can do like this. On the contrary, raise the plate and pull the wire rope, this can be called roll of rope.

(2). if the plate doesn’t stick the conveyor belt tightly, the conveyor will not send ash and avoid sending ash to the ground.

(3). if there is ash behind the plate, the plate will not lift well. We can press the vibration switch to clean up quickly and lift the plate again.

(4). if the machine work without ash or not enough ash, it will stop in advance.

4, Pics:

5. What Products We Do Make:

High efficiency, low consumption, easy operation, less maintenance, good quality and reasonable price, top technology, excellent service.

The Culture:

• Focusing on designing and manufacturing client-satisfied products.
• Patient and sophisticated after service.
• Expert of Roll Forming Machinery and Foam Machinery.
• Good communication and good relationship with clients.
• Helped hundreds of plants building.

The Creed:

Quality started here; We shall overcome!