Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Grinding Equipment

1.Magnetic classifier is horizontal type of classifier wheel ;, 2.Classifying efficiency 60%~90%;, 3.D97: 2~150 micron. - details see: https://www.machineto.com/high-classifying-efficiency-magnetic-classifier-10285051

Working Principle

Air classifier works with cyclone separator, dust collector and suction fan to form a complete classifying system. Material would go from the bottom part of air classifier up to the classifying chamber by the air flow from suction fan. The high-speed rotation of classifier wheel would create a strong centrifugal force to separate coarse powder and fine powder. Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would lose its speed and fall down along the house wall to the secondary air inlet. The secondary air flow would disperse it further and separate coarse and fine powder. Fine powder would go up to the classifying chamber for further classifying, while coarse powder would fall down and go out from the bottom outlet.

Performance Features

1. Suitable fordry fine powder classifying, powders of ball shape, flake shape and needle shape, also powders with different densities.

2.Product size from classifier can vary from d97:2micron to 150micron. Theproduct size is adjustable, which makes the change of product size easy and simple.

3. Classifying efficiency (extraction rate) can be between 60% and 90%. Material with good flow-ability would have high classifying efficiency, otherwise, the classifying efficiency would be low.

4. Horizontal type of classifier wheelwould have high rotation speed andprecise top cut.

5. Several units of classifiers can be connected in series to produce several different sizes.

6. It can be connected with ball mill, vibration mill or Raymond mill to form a close-loop recycling system.

7. Control system has program control, can indicate real-time status, which make operate very convenient.

8. Negative-pressure system. Dust emission would be less than 40mg/m3. Our machines have noise isolation device, which makes noise not higher than 75dB(A).

Technical Parameters

Multi-wheel Classifier

Parameter/ Type	FW 400/3	FW 400/4	FW 630/3	FW 630/4	FW 630/6	FW 800/4	FW 800/6	FW 1000/4	FW 1000/6
Throught T/h	0.2~1.5	0.3~2	1~5	2~8	3~10	3~10	5~15	5~20	8~30
Product size d97:um	3~45	3~45	3~45	3~45	3~45	5~45	5~45	5~45	5~45
Classifying Efficiency %	60~80	60~80	60~80	60~80	60~80	60~80	60~80	60~80	60~80
Installation Power KW	60~ 90	75~ 100	135~ 155	170~ 190	250~ 290	220~ 290	290~ 390	340~ 440	500~ 580

Note: throughput depends on heavily raw material size, density, moisture and flowability. The data above is just for your

reference.

Single-wheel Classifier

Parameter/Type	FW200	FW280	FW400	FW520	FW630	FW800
Throught T/h	10~100	20~200	50~500	100~1000	200~2500	400~4000
Product size d97:um	3~45	3~45	3~45	3~45	3~45	5~45
Classifying Efficiency %	60~80	60~80	60~80	60~80	60~80	60~80
Installation Power KW	7~11	15~19	21~28	23~30	52~60	67~77

Note: throughput depends on heavily raw material size, density, moisture and flowability. The data above is just for your

reference.

Applications

Widely used in chemical industry, mineral industry (especially good for calcium carbonate, kaolin, quartz, talc, mica and other nonmetallic product classifying), metallurgy industry, abrasive material industry, ceramics industry, fireresistance industry, pharmacy industry, pesticide industry, food industry, health care industry and new material industries.