Heated Desiccant Air Dryer,dew point -40Deg.C~-70Deg.C,air loss 6%,air capacity 0.7~510m3/min

1.Long-period switch., 2.Simple process, low failure rate, the investment cost is lower., 3.Operation, maintenance is simple. - details see: https://www.machineto.com/heated-desiccant-air-dryer-dew-point-40deg-c-70deg-c-air-loss-6-air-capacity-0-7-510m3-min-10294491

Type:Heated air dry	Place of Origin:Jiangsu China (Mainland)	Brand Name:HOUSEWELL	Model Number:KXR
Voltage:380V/3PH/50Hz	Certification:ISO9001:2008,CE	Warranty:ONE YEAR	Dew point:-40 Deg.C~-70 Deg.C
Desiccant:Activated Alumina	Air Handling Capacity:0.7-510m3/min(24~18010scfm)	Working Pressure:0.4~1.0Mpa(4~10bar)	Control Method:PIC Controller
Switch Time:120~240min(adjustable)	Air Loss:6%	Special Gas Available:Nitrogen and Oxygen	Service:OEM/ODM
Market:Europe,South America,North America,Australia,Asia

Heated Desiccant Air Dryer,dew point -40Deg.C~-70Deg.C,air loss 6%,air capacity 0.7~510m3/min

contact supplier for Heated Desiccant Air Dryer,dew point -40Deg.C~-70Deg.C,air loss 6%,air capacity 0.7~510m3/min

4.Energy save with air loss lower than 6%.

5.Heated type.

6.Using pressure swing adsorption, micro-thermal regeneration process.

7.Automation, running unattended.

ØHousewell heated desiccant air dryer systems operate on the principle of adsorption of water vapor from the air. The desiccant used is activated alumina, arranged in adsorption tower.

ØIn the switching time, one tower is adsorbing while the other one is regenerating. When adsorbing, the compressed air flow through the air inlet valve, then flow into the tower to adsorb.

ØWhen regenerating, a portion of dried air is diverted from the main pipeline as regeneration gas, then through the regeneration control valve to the heater for a certain time,then the heat air flow down the second tower,taking away the moister,finallypass through the outlet valve and be discharged through the muffler to atmosphere.

•The only one authorizedBritish Brand HOUSEWELLmanufacturer in China.

•Excellent moisture absorption capacity, Low dew point dry air can be supplied continuously:

-70Degrees Celsiusultra-low dew point aircan be reached especially in the environment withlow temperature and low humidity.

•Famous brandimported for main components.

•Sold inEurope,South America,North America,Australia,Asia.

Working pressure 4 -10 bar Switch time 120~240min

Inlet temperature ≤45°C Pressure drop ≤ 0.21bar

Ambient temperature ≤45°C Desiccant activated alumina

Pressure Dew point -40°C~-70 °C Inlet oil content ≤ 0.1ppm(w)

Air loss 6% Power supply 380V/3PH/50Hz

Special voltages available

Molecular sieve desiccant

Mounted air filters

Higher working pressure up to 400bar

Higher inlet temperature up to 50°C

SIEMENS PLC controller

Dew point displaying

ASME certificated pressure vessel

Stainless steel pipes lines,fittings and vessel

Special gas, such as nitrogen and oxygen

Housewelldesiccant air dryeradopts European the most advanced technology by PIC microprocessor control.The key components use the famous brand to ensure running steadily,operating efficiently with PLC display.Housewell desiccant air dryerused in a variety of lithium battery,pharmaceutical industry,precision instruments,brewing technique,food industry,film industry,aerospace industry,electronics industry,chip industry and etc.