Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

The gold plant has a screen and two gold tables., 1.long screen, 2.good efficiency, 3.Cummins engine, 4.easy operation - details see: https://www.machineto.com/gold-panning-equipment-10314959

It can work on the ground on the river banks and floating over pontoons on lakes, riverbeds saturated with water, also to say that the machines are gold concentration machines by hydraulic gravity that they can capture coarse, medium, and fine gold from placers or sedimentary alluvial gold deposits, this are the most efficient machines for gold mining.

The coarse material is transported by a circulating belt to the back of the plant and expelled to the river.The fine material, where the gold is present is transported once is washed inside the trammel and gets through a couple of concentrating tables with carpets and riffles where the fine, medium, and coarse gold is trapped. The gold from the carpets are together with heavy black sands, which are finally separated by a cone centrifugal machine.

This kind of gold mining, has the advantage that it does not modify the environment, the riverbed remains the same after extracting the gold content.

If you are in Bolivia, you can go to visit our agent..

Name: Hugo Torrico Buschen
Address: Barrio Guapay-Equipetrol, calle D 74, Santa Cluz
Tel: 746 47047 (mobile) 3340 1521 (home)

Specification:

Support structure : 100 x 100 x 4 rhs main frame with 75 x 75 x 4 rhs, 80 x 10 and 80 x 6 angle bracing, drag points front and back ex 25mm plate

Skids: 150 wide channel skids, 12 mm sacrificial wear plate on the bottom 200 mm wide (for used if based on land at a later date)

Trommel : 1524 mm diameter with 3 sections of 11.9 x 6.3 screen mesh, 10 mm wear rings in each end, 150 x 25 mm roller bands, 12 mm thrust wear ring. Hydraulic drive ( 1 Spare set of mesh and bolts )

Trommel Tray : 4 mm tray with 50 x 5 angle top support, rubber lined base and part sides with RL35 6mm lining

Hopper : 2.4 x 2.4 hopper ex 12 mm plate and support frame. With 12 mm wear liner

Discharge : 12 mm chute 750 mm long for tailings

Riffle table and riffles: 3 mm riffle table, 150 mm boil box, 4 lift out hydraulic riffle sections 1200 mm x 400 mm each, 4 x standard riffles ex 25 x 3, 1200 mm x 400 mm with magic mat underlay, 2 x GM 400 grid mesh section 1200mm x 600mm with magic mat underlay. Discharge chute 3.6 m long with RL35 rubber lining. Riffle cover with padlock for removal 2.4 m x 1.2 m

Water system : 150 main feed pipe with camlock fittings each end camlock fitting, manifold with 2 x 80mm feeds with valves to splarge pipes, 50mm feeds with valves to hopper,4 x 40mm outlets with valves for hydraulic riffles, 2 x outlets 40 mm with valves one spare and one fitted with 6 m of 32mm wash down hose with cammlock and nozzle. 6" water pump with filter suction and hand primer

Stacker : conveyor stacker 1000mm wide and 8m long hydraulic drive

Drive System: 60hp Diesel Engine driving 6" water pump and hydraulic pump

Pontoons : Pontoons ex 4 mm steel 1.2m deep x 2.5m wide x 11.5m long with joining end pontoons 01.2m deep x2.5m wide x 11.5m lon. Wire rope manual winches in 4 corners each with 30m of 10mm galvanized wire rope

Painting : All steelwork to be wire buffed, and sprayed paint.