Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Dredger

1.discharge distance :1500m, 2.water flow :3500 cbm, 3.capacity:500 cbm/h, 4.dredging depth :15m, 5.895 kw cummins engine - details see: https://www.machineto.com/gold-dredge-10311941

18inch cutter suction dredger

main parameter of the cutter suction dredger:

A.Principal Dimensions
(1)Length overall	40 m
(2)Breadth	7.6 m
(3)Depth	2.0m
(4)Draft loaded	1.3 m
B.Main Pontoon
(1)Length	18m
(2)Width	3.3m
(3)Depth	2.0m
(4)Plate thickness- sides	6mm
(5)Plate thickness- front and rear sides	12mm, 12mm
(6)Plate thickness- Deck	6mm
(7)Plate thickness- Bottom	8mm
C.Side Pontoons
(1)Length	26m
(2)Width	2.15m
(3)Depth	2.0m
(4)Plate thickness- sides	6mm
(5)Plate thickness- Deck	6mm
(6)Plate thickness- Bottom	8mm
D.Operational Conditions
(1)Maximum Dredging Depth	15m
(2)Minimum Dredging depth	1.5 m
(3)Dredging width	40m
E.Dredging Pump
(1)Type	Shijiazhuang Pump WN450
(2)Particle Clearance	254mm
(3)Suction Dia.	600 mm
(4)Delivery Dia.	450 mm
(5)Water Flow	3500 cubic meters/hr
(6)Output	500 cubic meters/hr
(7)Discharge Distance	1500 m

main features of the sand dredger :

1.The 18inchCutter Suction Dredger of steel construction, non selfpropelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers .

2.The hull consists of three pontoons, one main pontoon (engine room), two side pontoons.

3.The CSD300 dredger to be transported by road, rail or water. 4.The hull is of all welded, steel construction to give the dredger the necessary strength required for dredging operations. The side pontoons are connected to the main pontoon by means of bolts.

5.The hull steel plate used is CCSB (shipbuilding steel plate ) .

6.The bottom of dredger steel plate thickness 8mm ; The shell plating thickness 6mm,Deck plating thickness : 6mm , 8mm , 10mm , 12mm, 16mm

sand dredger factory :

our sand dreger working:

contact person: