Home  >  Raw Material Processing Machinery  >  Paper Processing Machinery

The machine is mainly used to slit stick paper, craft paper and other kinds of paper. - details see: https://www.machineto.com/fqj-1300a-high-speed-paper-roll-slitting-machine-vertical-paper-slitter-10332759

Main Technical Parameter:

1.The rang of gram weight: 50-400 kg

2.The cutting width : 30-1250mm

3.The diameter cutting is less than 1300 mm

4.Finished specification width : 30/1250mm , the diameter of paper is less than 1100mm, After the cut end deviation1mm, Paper roll tightness of consistent, end face flush

5.The deviation of cutting width : -0.5mm to +0.5

6.The speed of operation : 0-150m/min

7.The suitable material : 50-400kg

8.The rang of rewinding : from 50mm-1200mm within could adjust , the circular knife is 14 pieces .

9.The mode of taking up equipment : it adopts double rewinding shaft, it could choose different roll according to your requirement ! it is equipped with air-expansion ( 2 pieces of 3 inch air-expansion rewinding shaft )

10.In the system : Correct an error to make sure good condition , also the scrape edge is 3-8mm

11.The unwinding parts : it could adjust from left to right , the air-expansion shafts is hard to make sure handing is safe and convenient !

12.Feeding tension control : 20kg magnetic powder control

13.Automatic count meter, alarm and halt equipment , the whole is equipped with safe signal and shield to make sure operate safety

14.The rewinding parts : it is adopted double torque motor control , the dia. of rewinding is less than 1100mm

15.The whole adopts superior steel plate ( thickness is 30mm) and channel steel structure, slide adopts linear bearing.

16.It adopts the dia is 100mm dynamic balance.

17.The mainframe adopts 5.5km stepless frequencyspeedregulationis 0-150m/min( it could adjust according to different material )

Machine show :

Finish products show:

Machine Certificates:

Machine loading :