Home  >  Farm Machinery  >  Farm Machinery  >  Farm Irrigation System

1.galvanized pipe fitting, 2.pipe diameter 159/165mm, 3.pipe thick 2.75mm,4mm,5mm, 4.motor power 0.75kw, irrigation system - details see: https://www.machineto.com/farm-water-agriculture-200-meter-center-pivot-sprinkler-irrigation-system-irc-200-10182811

COLDMAX irrigation system:

The hot sale center pivot irrigation system is mainly used for sprinkling a variety of field crops, industrial crops and pasture. The automated irrigation system characterizes high efficiency, reducing water and energy consumption, increasing yield and saving labor. Its electrical alignment control system is safe and reliable, the over-watering protection and automatic display unit save water and troubles. The systems are equipped with impact sprinkler with uniformity coefficient more than 85%, and can be used for the uniform application of chemicals and fertilizers. The systems can be operated on fields with slopes of up 25%

VXD center tower
COLDMAX center pivot irrigation system is resistant to any ordeals. Cemented in place, it perfectly absorbs the stresses caused by the site's landform and the rotational motion of the device.
A watertight main located on top of the central structure and easily accessed.
Equipped with 11 locking rings, it ensures all electrical connections between the switchgear console and the movable rows.

Water gun's stop control
Irrigation management system can control the starting up and the stopping of the gun when the sprinklers at alternate points.

Control of shutdown
When a irrigation rotation is over, the machine will gradually stops the water supply as well as automatic shut-off to make sure all electronic controls safety.

The switchgear console
The door is complete with watertight and solid, with all the control element and components inside. It is meet the severe standards of security. In addition, the component
Has been selected severely to make sure reliable working performance.
Its wiring has been marked in the end so that the circuit can be accurate.
Speed regulator with simple operate, will accurately measurement for irrigation volume.
The most important thing is COLDMAX switchgear console can contribute to spray of chemical fertilizers and pesticides.
Other extra features are anti-wheel slipping, protection against ground discharge, timing.
The pivot control can design program to correct proportional irrigation (such as time, percentage and irrigation volume ) as well as start time of the machine. The user can visually observe more operation date at any time.

The VXP structure

COLDMAX has chosen this type of construction because of its solid structure. V shaped diagonals evenly distribute the weight all along line. All elements: Tubes, diagonals, bearers, girder stabilizers, and axles are hot DIP galvanized.
Polyethylene lining will protect the pipe from corrosion and abrasion.
It is good for water flow through the pipe.

Coupling
The connecting shaft attribute the connection between two span. After the
Accurate design, it can adopt to any terrain to irrigate. Rubber seal ring
Is located within two aluminum shells that means water can through smoothly and decrease the loss of pressure. Any one can replay connecting shaft easily for its simple construction.

Drave shaft
After the special design, the drive shaft is able to connect reducer and motor -reducer. Our reducer is complete with elasticity in order to anti-vibration.

Wheels

Galvanized wheel is able to protect the tire from decay. We can provide the size of tire is following specification:
1.11.2*24
2.11.2*38
3.14.9*24
4.16.9*24

Gear box
COLDMAX gear box is made of quantity material. Body and gear also made of cast iron. The conical bearing can be fixed with more bigger diameter gears. For the lubricating expansion chamber has been equipped inside, gear box keep balance between chamber and the outside. And avoid the pollutant or water entering.