Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Other Mining Machines

Mining drying equipment/Sand dryer, Mining drying equipment, High efficiency,Large throughput, high degree of mechanization, ISO - details see: https://www.machineto.com/environmental-protection-mining-drying-equipment-sand-dryer-china-quality-supplier-10319344

Environmental protection Mine drying equipment/Sand dryer

Main characteristics of Mine drying equipment/Sand dryer

Mine drying equipment/Sand dryer internal adopts assembled structure which has improved the accuracy of the equipment and it is easy to transport and install.

According to the characteristics of different fertilizers,we have arranged the second granulation zone reasonably so as to improve the granulation effect.

Adopts assembled hoist board so as to exchange heat fully,lower the energy consumption.

Temperature induction monitor, uniform vibration and airproof setting, which improve performance and productivity efficiently.

Introductionsof Mine drying equipment/Sand dryer

Due to a high surface area to weight ratio,finesized Raw materials carries a high moisture load that can cause materials handling problems,such as sticking in bins and freezing in winter,as well as reducing boiler efficiency from heat required to evaporate moisture.

Fines can be thermally dried,however, they are very dusty and the process is expensive and energy intensive.A significant proportion of thermally dried fines can be lost as wind borne dust, resulting in a loss of valuable fuel.The proposed cleaning technology to be implemented is known as the Good Heavy process.

Finally,the emulsion can be added before flotation as a collector,providing many benefits from this technology, while reducing or eliminating the need for petroleum collectors.

Main Features of Mine drying equipment/Sand dryer

High degree of mechanization, large production capacity,continuous option.

Simple and excellent structure,material running smoothly through the cylinder, operating convenience.

Drying production line using a special scattered installations to ensure the dryer's drying effect

Use innovative and unique sealing device,and sophisticated keep-warm system.

Thus reduce the coal consumption of the system effectively.

The whole system holds a good performance of sealing.

It also has a complete dust removal equipment.

There is no dust spilling.

The whole drying system uses electric centralized control,autocontrol of temperature for hot air,high automation and convenient operation.etc.

Main Technical Parameters of Mine drying equipment for your reference

Model (m)	Obliquity(%)	Rotation speed (r/min)	Feeding temperature (degree)	Power (kw)	Capacity(t/h)	Weight (t)
Ø0.6x6	3-5	3-8	≤700	3	0.5-1.5	2.9
Ø1.2x10	3-5	3-8		7.5	1.8-5	14.5
Ø1.5x12	3-5	2-6	≤800	15	3.5-9	17.8
Ø1.8x12	3-5	2-6		18	5-12	25
Ø2.4x20	3-5	1.5-5		37	18-30	60
Ø3x25	3-5	1.5-5		75	32-40	104.9

Notes

First-rate After-service

1.Provide consultation services for customers, determine operational scales, and provide factory-establishing plans.

2.Freely install, debug, and provide relevant technical training.

3.Strict carry out three guarantees (guaranteed quality, guaranteed quantity and guaranteed repair), and contains technical consultation.

4.Ensure spare parts and components available adequately and timely.

5.The Project Report will be made according to the client's actual requirements.

6.Further business,further discussions.

Main installation introduce

It is one of the main equipment of mineral processing equipment, technical installation requirements, process standards high. Erection work shall be in accordance with the relevant design documents, drawings, standards, rules and regulations, according to the correct installation procedure and the working instruction to carry on the reasonable construction.

Before dryer installed, the first preparation work is the basis acceptance, main check foundation concrete pouring quality and position deviation size. Requirements the based appearance surface clean, no oil, dirt, debris, no rebar nudity, no crack missing Angle, expected leave hole no residual shell , and other casting defects. For base size and position deviation shall meet the following requirements: overall dimensions and basic coordinate position, vertical and horizontal axis error is less than 20 mm......For moredetails please

Warmly welcome to come to Henan Good Heavy to inspect the cooperation!