Home  >  Printing Machinery  >  Pre-Press Equipment

Simple to operate, Accurate Graphic size calibration, Energy automatic balance system, High quality dedusting system - details see: https://www.machineto.com/ctp-thermal-machine-pre-press-ctp-platesetter-10072467

Konita Tseries CTP thermal Platesetter

Technology Strength:

1. Technology of DDS Frequency Multiplication Drum's Automatic Balance

The technology of DDS frequency Multiplication ensures the phase jittering within 1/32 pixel , keeping straight lines both vertically and horizontally. It takes at most 5 seconds for the drum's automatic weight balancing system to adjust to a new position, switching plates with different sizes instantaneously.

2. Accurate Graphic Size Calibration

The CTP with an external drum has many advantages but brings in graphic parallelogram distortion triggered by multichannel scanning.

Konita's unique graphic calibrating technique enables image to exhibit perfect rectangles and eliminates dimensional deviation caused by different plate thickness. The Registering precision of one Konita is 5 microns, it can reach 15 micron after calibrating with two different Konita CTP's.

3. Dynamic autofocusing

With the third generation of dynamic focusing technology, Konita UV series can directly detect such minute distance change as 0.1 microns.

Driven by voice coil motor , Konita CTP can also track any change in focal length with an incredible acceleration of 30g. The combination of these unique features of Konita CTP not only guarantees the deviation of density between any two areas less than 0.30% in a full page screen, but also avoid blue stains and blurs caused by tiny dusts on the drum surface.

4. Energy Automatic Balancing System

The temperature control system in laser thermostatic shielding box can precisely adjust the temperature automatically with a minimum of positive or negative 0.1 degrees in both directions. It also automatically calibrates light intensity every 8 hours under an accurately thermostatic condition and therefore ensures the consistency of laser energy reached plates.

5. World class core components.

C0-level ball screw and ball guide rails(same as Screen 's CTP).

The combination of top-level professional components and Konita exquisite manufacture together offer you an exceptional professional CTP.

6. The high accurate external drum has a ceramic surface

It runs with a rotatory run-out less than 8 microns and never wear out.

The high reliable plate clamping system has a large tolerance when desighed.It has passed over 200,000 tests for fatigue reliability with a non-flyout-plate record of 4,000,000 hours.

7. The High-quality dedusting system

Sucks dusts caused by printing process and collect them in a dust bag by filtering instead of direct discharge dust into the air . The three stage radial flow vacuum pump adopts aeronautic technology with a small size and low energy consumption. Its power of 500w corresponds to 1100w of a lateral flow fan.