corrugated carton machine

printing slotting die cutting machine/corrugated carton machine/packing machine

Main Machine Function

1,High-quality metal and fittings are used for the machine.

2,The dive gears are hardened and ground (Hardness >HRC 60)

3,Automatic zero set

4,All the clearance can be adjusted manually or electrically

5,The machine is manufactured according to the high requirement for operation ,reliability and safety .Rapid order changing and convenient operation.

6,All rolling shafts are plated with chromium to enhance hardness

7,PLC with touch-screen multifuctional control ,repeat order store and auto reset system after cleaning .

Paper feeding part

1,Vaiable frequency control of the main elecromotor

2,Vacuum-assisted feeding system ensures the bending board can be fed correctly with high speed

3,The position of the right side baffle is electrically adjusted

4,Skip feed device is available ,the maximum length is 1400mm

5,Special fan sufficiently eliminates the dust and scraps on the surface of board to improve printing quality .

6,The maximum width of feeding paper:2600mm

Printing part

1,The phase is 360 degree adjusted by electric planet gears .Keyless junction and foot-operated on-off make the plate loading and unloading convenient.

2,The plate roll axial adjustment is electrical or hand-operated .Range :0-10mm

3,Good quality metal anilox rollers from pofessional factory.

4,Drum-type rubber roller ensures the quality of ink distributing

5,Pneumatic circular ink supply system

6,Ceramic anilox roller can be chosen

7,Enlarging printing area:1200*2400mm

8,Satisfy the prinnting plate bundle of board ,apply to bundle of standard plate strips

Slotting part

1,The phase is 360 degree adjueted by electric planet gears.Keyless junction

2,The height of carton is adjusted by electric internal-touch structure

3,The polyurethane precompression wheel guaranteed that the card-board is not crushed

4,The width and length of carton are adjusted electically and synchronously

5,Obverse and inverse knives are alternative

6,The match hits buckles ,the hand inetallment function and so on order fom management

Die cutting part

1,Youli cushion imported from Taiwan

2,Double-worm abrasire belt cushion correction facility

3,Cushion axial floating automatically to improve the utilization rate of cushion. The ange of floating is 0-20mm (from

middle to left or right )

4,Speed difference self-compensating function

5,The axial adjustment of platen roller is hand-operated .Range:0-20mm(from middle to left or right)

6,Die cutting phase is adjusted by electric planet geas.Keyless junction.