Home  >  Pharmaceutical & Chemical Product Machinery  >  Pharmaceutical Machinery Parts

On line High Shear Emulsifier is for emulsfying, dispersing and emulsifying materials with precision engineered stator & rotor. - details see: https://www.machineto.com/continous-high-shear-emulsifier-homogenizer-10306819

On line High Shear Emulsifie

1. Reference Parameter

Model	Motor (kw)	Flow (m3/h)	Speed (rpm)	Inlet (mm)	Outlet (mm)
SRB1.1/1/2	1.1	1	2930	DN32	DN25
SRB1.1/1/6	1.1	0.8	2930	DN32	DN25
SRB4/1/2	4	6	2930	DN40	DN32
SRB4/1/6	4	5	2930	DN40	DN32
SRB7.5/1/2	7.5	8	2930	DN50	DN40
SRB7.5/1/4	7.5	7	2930	DN50	DN40
SRB7.5/1/6	7.5	7	2930	DN50	DN40
SRB11/1/2	11	12	2930	DN50	DN50
SRB11/1/4	11	11	2930	DN50	DN50
SRB11/1/6	11	10	2930	DN50	DN50
SRB18.5/1/6	18.5	16	2930	DN65	DN50
SRB22/1/6	22	20	2930	DN80	DN65
SRB30/1/6	30	28	2930/1450	DN100	DN80
SRB37/1/6	37	35	2930/1450	DN125	DN100
SRB45/1/6	45	42	2930/1450	DN150	DN125
SRB55/1/6	55	50	2930/1450	DN150	DN125

2. Working Principle

The high linear velocity (generated at the high speed rotating rotor of the High-shear Homogenizing Emulsifier) and strong kinetic energy (generated by the high frequency mechanical effect) put the materials under comprehensive action such as strong shearing, centrifugal extrusion, hydraulic friction, crash etc between the precision gap of the stator and rotor. As the result, the solid phase, liquid phase and gas phase which is insoluble at beginning will prompt evenly dispersed and emulsified after adopting mature production processing and proper quantity additives.

3. Main Features

Inline High-shear Emulsifier consists of one set of precision engineered stator and rotor inside the chamber. The strong centrifugal forces generated by the high speed rotation rotor absorb the materials into the working chamber of the rotor and stator from axial direction. All the materials dispersed, sheared and emulsified by the multi-layers Stator & Rotor and then ejected from the axial direction. Stable finished products with high quality are produced after one time circulation or times.

Remarks:

*The above listed Max. processing capacity is calculated as per water as medium. The model selection should depend on the comprehensive factors such as materials viscosity, specific gravity etc.

*If works under special environment such as high temperature, high pressure, explosive, combustible, corrosive etc, correct data is required for correct model selection.

*The above data and picture is subject to change without notice. The accurate parameter should be subject to the object.

*Not all products are listed. For more, please contact with our sales engineer.

For more information or any question, please contact

SIEHE Company

Tel:+86 21 52913185, 52913186

Fax:+86 21 52912822