construction machinery of 6m multifunction asphalt road paver MTL6000

1.2.5-6m paving width, 2.Cummins 4BTA3.9-C125 engine with 93kw power, 3.350t/h production capacity, 4.16.5tons weight - details see: https://www.machineto.com/construction-machinery-of-6m-multifunction-asphalt-road-paver-mtl6000-10118170

Condition:New	Production Capacity:30t/h	Power(W):93kw	Max. Paving Thickness:250mm
Paving Width:6m,2.5-6m	Place of Origin:Sichuan China (Mainland)	Brand Name:Xinzhu	Model Number:MTL6000
Dimension(LWH):626726503670mm	Weight:16.5t	Warranty:12 months	After-sales Service Provided:Overseas third-party support available
Engine model:4BTA3.9-C125

construction machinery of 6m multifunction asphalt road paver MTL6000

contact supplier for construction machinery of 6m multifunction asphalt road paver MTL6000

MTL6000 Multi function paver

MTL6000 wheel type paving machine is fully hydraulic driven; its two pairs of front wheel are solid rubber wheel(front pair is steer wheel) so as to both increase bear ability and avoid more deform of tyre and reduce effect about paving quality; rear wheels are a pair charge tires; high travel speed (13km/h) and less swerve radii (6.5m); it can transfer freely from on site to another with lower transfer expensive; well flexibility and operation performance; there is powerful managing ability for little pile or deep pit; when paving on a curve it can make smooth mat.

Imported American Sarau hydraulic drive elements; CUMINS 4BTA3.9-C125 engine, high anti-wear vanes; super large Hooper; flex type screed; rotate speed of tamper and vibrator may be continuously changed; engine cover may turn over; slide handle console; removable console; American Sauer-Danfoss control system; two longitudinal and one transverse level system; Ultrasonic material level control; imported electric control elements make the system realize automatic dependable and accurate control; basic paving width 2.5m and most flex paving width 4.5m, and mechanical extend to 6.0m; imported integrate lubricate system.

CHARACTERISTICS:

Strong power and convenient maintenance from CUMMINS provides better operation and applicability.
Famous REXROTH hydraulic components and traveling speed reducer greatly improve the products’ quality, applicability and reliability and life span, and gain a good performance-cost ratio.
Separate crawler hydraulic transmission on right and left, realize spot-turning and smooth paving on the curve under presetting the verve radius.
With optimized auger blade, REXTOTH low-speed and large-lorque motor, the distributor outputs a big torque as well as strong conveying power, reduces the eduction, and meets the paving compactness.
Imported high-quality electronic control components, make micro-computer constant speed control system, two longitudinal and one transverse leveling system, ultra-sonic material control more match-able and reliable, completely realize the accurate control, and ensure the compactness and smoothness of the paver.
Enlarged suction radiator ensures continuous work for 24 hours.
Lengthened crawler, widened stronger screed, lengthened beam and enough power, better meets various road construction and repair.

Parameter:

Description	unit	MTL6000
Basic paving width	m	2.5
Max. expansion width	m	4.5
Max. paving width	m	6
Max. paving thickness	mm	250
Paving speed	m/min	0-16
Traveling speed	Km/h	0-13
Theoretic production capacity	t/h	350
Hopper	t	12
Gradient ability	%	20
Paving smoothness	mm/3m	3
Engine type		4BTA3.9-C125
Output/ rotating speed	kW/rpm	93/2200
Pre-compactness	%	90
Screed lengthening		Mechanically+ Hydraulically extended
Amplitude of double tamper
Electric control system		S11
Mass	t	16.5
Dimension	mm	6267x2650x3670