Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

1.low cost, 2.easy opreating&installation, 3.speed can be controlled & the entire operating, 4.improve production efficiency - details see: https://www.machineto.com/construction-electric-hoist-2ton-with-wireless-control-for-lifting-machinery-10097037

construction electric hoist 2ton with wireless control for lifting machinery

Electric hoist Introduction:

Type CD1 (MD1), wire-rope electric hoist is a kind of small-lifting equipment, it can be mounted on single beam overhead crane, gantry cranes, jib type CD1 (MD1). Electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbours, warehouses, cargo storage area and shops, essentially in raising working efficiency and improving working conditions.

1. CD1 and MD1 series of steel rope electric hoist are improved ones on the basis of the original CD and MD .

2. Tight structure ,smart body,safety and reliability ,commomused parts,strong lifting capacity, easy maintance.

3. The hoists exists in form of stationary style.

4. The products are widely at industrial ore enterprises ,railway,harbors,warehouses and materials sites etc.

5. Working environment:no fire,no explosive danger ,no corrosive media and no dirt exist.

Motor	Hoist Motor is a taper type rotor motor with braking, it is made by Nanjing special motor factory, it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently. the Maximum torque is 2.4-3 times than the rated torque.
Gear Box	Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope	Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum	Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system	Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
Rope Guide	Rope Guide is in two halves, ensuring easy accessibility. It encircles the drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook	The Hook Block is tested to 150 % of full load before assembly.
Reducer	Thirdclass dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel.
Safty divice	Fire stopper ,overload limited device ,
Electric Hoist Control	1. Pendant and remote control2. Easy, safe and Smooth operation3. Waterproof , anti-fall

:

Parameter

Model	CD1 MD1
Capacity	Tons	0.5	1	2	3	5	10	16
Hoisting height	M	6,9,12	6,9,12,18,24,30				9,12,18,24,30
Hoisting speed	M/MIN	8(0.8/8)	8(0.8/8)				7(0.7/7)	3.5(0.35/3.5)
Travel speed	M/MIN	20/30	20/30	20/30	20/30	20/30	20/30	18
Wire rope	Dia.(mm)	4.8	7.4	11	13	15	15	17.5
	Spec.	6x37+FC	6x37+FC				6x37+FC	6x37+FC
Hoisting motor	Type	ZD121-4	ZD122-4	ZD131-4	ZD132-4	ZD141-4	ZD151-4	ZD151-4
		ZDS1 0.2/0.8	ZDS1 0.2/1.5	ZDS1 0.4/3.0	ZDS1 0.4/4.5	ZDS1 0.8/7.5	ZDS1 1.5/13	ZDS1 1.5/13
	Power(kW)	0.8(0.2/0.8)	1.5(0.2/1.5)	3.0(0.4/3.0)	4.5(0.4/4.5)	7.5(0.8/7.5)	13(1.5/13)	13(1.5/13)
	Rotation speed(r/min)	1380	1380	1380	1380	1400	1400	1400
	(A)	2.2(0.72/2.4)	4.3(0.72/4.3)	7.6(1.25/7.6)	11(2.4/11)	18(2.4/18)	30(5.2/30)	30(5.2/30)
Travel motor	Type	ZDY111-4	ZDY111-4	ZDY112-4	ZDY112-4	ZDY121-4	ZDY121-4	ZDY121-4
	Power(kW)	0.2	0.2	0.4	0.4	0.8	0.8x2	0.8x2
	Rotation speed(r/min)	1380	1380	1380	1380	1380	1380	1380
	Current(A)	0.72	0.72	1.25	1.25	2.4	2.4	2.4
Power		AC 380V,50HZ,3P

Please kindly tell us the following information for your electric hoist inquiry:

1. The lifting capacity.

2. The lifting height.

3. CD or MD or low headroom. ( single lifting speed or double lifting speed )

4. The industrial voltage.

So that we can give you a exact quotation about your needed products.

If you want to order the products pls contact me,we will give you our quotation as soon as possible and according to your special demand to design.

Welcome to visit our factory !!!