CNI Diode Red laser system at 660nm / MRL-III-FS-660 / 1000~1500mW
1.Ultra compact, 2.Long lifetime, 3.Low cost, 4.Easy operating - details see: https://www.machineto.com/cni-diode-red-laser-system-at-660nm-mrl-iii-fs-660-1000-1500mw-10231508
| Place of Origin:Jilin China (Mainland) | Brand Name:CNI | Model Number:MRL-III-FS-660 | Wavelength:660nm |
| Output power:1000-1500mW | Size:Standard |
APPLICATION:
It is widely used in measurement, spectrum analysis, and laser lighting show, etc
SPECIFICATIONS:
| Wavelength (nm) | 660±5 | ||
| Output power (mW) | >1000, 1100, 1200, … , 1500 | ||
| Transverse mode | Near TE00 | ||
| Operating mode | CW | ||
| Power stability (rms, over 4 hours) | <1%, <3%, <5% | ||
| Warm-up time (minutes) | <10 | ||
| M2factor | <20 | ||
| Beam divergence, full angle (mrad) | <2.5 | ||
| Dimensions of beam at the aperture (mm) | ~4×9 | ||
| Beam height from base plate (mm) | 28. 5 | ||
| Polarization ratio | >50:1 | ||
| Pointing stability after warm-up (mrad) | <0.05 | ||
| Operating temperature (°C) | 10~35 | ||
| Power supply (90-264VAC or 5VDC) | PSU-III-LED | PSU-III-FDA | PSU-III-OEM |
| Modulation option | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option | ||
| Expected lifetime (hours) | 10000 | ||
| Warranty | 1 year | ||
| Remarks | MRL-660 is a diode laser module, so the beam quality is not as good as the solid-state laser at 671nm. The beam spot is nearly square. | ||
| Packaging Detail:vaccum anti-static |
| Delivery Detail:1-2 weeks |
Related Product for CNI Diode Red laser system at 660nm / MRL-III-FS-660 / 1000~1500mW
CNI Diode Fiber Coupled Laser System at 660nm / FC-660 / 1~2000mW
1.Wavelength: 660nm2.Output power: 1-2000mW
3.Fiber connector: SMA905/FC
CNI DPSS Fiber Coupled Laser System at 660nm / FC-660 / 1~300mW
1.Wavelength: 660nm2.Output power: 1-300mW
3.Fiber connector: SMA905/FC
CNI Fiber coupled laser system at 685nm / MRL-685(FC) / 1~15mW
1.Wavelength: 685nm2.Output power: 1-15mW
3.Fiber connector: FC/SMA905
CNI Fiber Coupled Laser System at 671nm / MRL-671(FC) / 1~4000mW
1.Wavelength: 671nm2.Output power: 1-4000mW
3.Fiber connector: FC/SMA905
CNI Fiber coupled laser system at 690nm / MRL-690(FC) / 1~650mW
1.Wavelength: 690nm2.Output power:1-650mW
3.Fiber connector: FC/SMA905
CNI Fiber coupled laser system at 680nm / MRL-680(FC) / 1~800mW
1.Wavelength: 680nm2.Output power: 1-800mW
3.Fiber connector: FC/SMA905
CNI Fiber coupled laser system at 690nm / FC-690 / 1~650mW
1.Wavelength: 690nm2.Output power: 1-650mW
3.Fiber connector: SMA905/FC
CNI Fiber Coupled Laser System at 671nm / FC-671 / 1~1200mW
1.Wavelength: 671nm2.Output power: 1-1200mW
3.Fiber connector: SMA905/FC
CNI Fiber coupled laser system at 680nm / FC-680 / 1~800mW
1.Wavelength: 680nm2.Output power: 1-800mW
3.Fiber connector: SMA905/FC
CNI Fiber coupled laser system at 685nm / FC-685 / 1~15mW
1.Wavelength: 685nm2.Output power: 1-15mW
3.Fiber connector: SMA905/FC
CNI Fiber coupled laser system at 793nm / MDL-793(FC) / 1mW~1.5W
1.Wavelength: 793nm2.Output power: 1~1.5W
3.Fiber connector: FC/SMA905
CNI Fiber coupled laser system at 730nm / MDL-730(FC) / 1~25mW
1.Wavelength: 730nm2.Output power: 1-25mW
3.Fiber connector: FC/SMA905