Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

china drying machine for factory, 1 big drying strength, 2 easy to operate, 3 SGS certification, 4 stable performance - details see: https://www.machineto.com/china-drying-machine-for-factory-for-sale-10290669

China drying machine for factory

Introduction :

Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

Wood dryer is suitable for drying materials likesawdust, rice hull, milling wheat straw, and corn stalks and so on.

The moisture of wet materials is at 20-60%.

The moisture after drying is at 8%-12%.

Working principle:

The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

Note:

Raw materials diameter: <1mm&<5mm

Specification :

1. The wood drying machine equipment is suitable for drying materials of moisture 20-70%.

2.The dryer is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper.

3. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock

4. This airflow type sawdust dryer machinery reduces the moisture to 8-12%.

5. Clients can change the angle of dryer base on the production field

6. it is only to control the moisture of raw material at a reasonable range that can make good result of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.

Technical Parameter:

Model	Power (kw)	Capacity (kg/h)	Structure	Net/Gross Weight (kg)	Packing Dimension (m³)
HGJ-I	4	300-400	Square stove, pipe	1000/1100	6.36
HGJ-II	7.5+0.75+0.75	500-600	Square stove, Round stove, Pipe	2040/2260	12.41
HGJ-III	11+0.75+075	800-1000	Square stove, Round stove, Pipe	2850/3080	13.59
HGJ-IV	15+1.5+0.75	1100-1300	Square stove, Round stove, Pipe	3080/3280	14.68

Overview of the Sawdust Dryer:

To get more information contacting me

Carolyn Ji

Mobile: 0086 159 3904 5080

Skype: carolyn_ji