Home  >  Construction Machinery  >  Building Material Machinery  >  Glass Production Machinery  >  Glass Processing Machinery

Waterjet gasket/rubber/foam cutting with CE certificated can make your product perfect with high precision and fast speed - details see: https://www.machineto.com/ce-certificate-waterjet-gasket-rubber-foam-cutting-10084491

The technical information of waterjet gasket/rubber/foam cutting machine:

Ultra-High Pressure Intensifier

Main technological features:

1. there is shock absorber installed in the four corners of the motor, which reduces the shock and noise.

2. the wave crest cotton has good effect to lower the noise.

3. double oil filter for inlet and outlet ports, which will improve the clean of hydraulic oil and the stability of machine working.

4. the stage safety unloading valve can discharge the system pressure which guarantees the safety of operators and machine, when the machine need to stop in emergency.

5. there is low pressure inlet water safety overflow switch, which can guarantee the safety of high pressure water, and the inspection of low pressure inlet water can avoid the troubleshooting of machine caused by the less low pressure inlet water supply.

6. the efficient cooling system component can reduce the volume of oil tank and lower the the working cost.

7. imported intensifier, which guarantees the quality of the whole pump.

Main technical data

Main motor power 37KW	Length 1745mm
Max. working pressure 380Mpa	Width 1045mm
Max. flow tate 3.7L/min	Height 1350mm
Control system PLC(Omron)	Weight 1200Kg
Cutting Water Inlet pressure over 0.1Mpa	Lp Low Pressure Filter 10um
Cooling Water Inlet pressure over 0.5Mpa	Safety unloading valve Standard components
Max. oil pressure 20Mpa	Oil level and oil temperature sensor Standard components
Accumulator Volume 1.2L
High Pressure Outlet Connections M16×X1.5

Flying Arm Style Cutting Table

•CE certificate

•ISO9001 certificate

•20 national patents

•can match multiple cutting heads

•professional water jet CNC system

•following device system

Working environment of cutting table

Environmental temperature -10-50°C

Atmospheric pressure 86Kpa~106Kpa

Dust concentration Not more than 10mg/m3.

There should not be acidoid, alkaline substance and corrosive substance in the air. The machine should be kept away from hypocenter, heat producer, intense magnetic field, electric field and other source of the disturbance.

Main technical data of cutting table

Power Requirement AC220V	50/60Hz
X-axis servomotor	0.75KW 1.0KM 1.5KW
Y-axis servomotor	0.75KW 1.0KM 1.5KW	Three specification
Z-axis step motor	0.9N.m
X-axis max. moving speed	6000mm/min
Y-axis max. moving speed	6000mm/min
Z-axis max. moving speed	1000mm/min
Cutting accuracy	±0.1mm~±0.2mm	Related to cutting speed,different materials and thickness of material
Repeatable positioning accuracy	±0.2mm

CNC system

The only patent of complete system in China, provide perfect waterjet cutting solution.

PLC-Omron

using PLC instead of relay will establish communications with computer, flexibility control.