BLOCK CUTTER ( Cross Type)

-Cross Block Cutter is used to traverse cutting continuous foam blocks, - It's equipped with oscillating saw blade. - details see: https://www.machineto.com/block-cutter-cross-type-10323903

Place of Origin:Taiwan

Brand Name:SUNKIST

Model Number:SA-C1

contact supplier for BLOCK CUTTER ( Cross Type)

SA-C1 Block Cutter is used to traverse cutting continuous foam blocks. When proceed with cutting operation, the machine is automatically synchronized with the foaming speed. The cutting unit is driven together with foaming drive while two sets clamper clipping the foaming block.

The cutting unit equips with oscillating saw blade carried by chain. After cutting finished, the band saw will tough a limit switch and clamper will loose, then cutting unit will driven by a clutch motor to return to its original position for continuous cutting. The band saw is able to cross traversing. The band saw guides within the cutting area by a highly tensioned knife guide. The cutting length can be preset and adjust by digital counter.

TECHNICAL DATA:

Cutting width: 2100mm (optional 2514mm)

Cutting height: 1300mm (optional 1500mm)

Cutting length: can be preset from 1.5M ~ 3M at foam speed of 5M/min.

Band saw width: 66mm

Cutting speed: 18 seconds per cycle (60HZ)

Power: 1HP x 6 for band saw driving

1HP x 4P with reducer

2HP x 4P with turbine reducer

Working air pressure: 6 bar