Anodizing technology

Inner size 8000mm(Length)×1500mm(Wide)×2500mm(Deep)

Useful volume 26.40m³

Operating temperature 20±2°C

Operating time20-40min

Chemical180g/l H₂SO₄

Raw material of tankSteel with PVC lining

Electrical System

Volume per tank per cycle80m²Current density1.3A/dm²

Pulse Rectifier 12000A,24V,Air cool, (Complete

with over heat,over current,phase shortage

and short circuit protection)

Cathode bar 100×200mm,Aluminum 4pcs

Cathode Plate180×2500mm Aluminum 140pcs

Aluminum bus bar 1 lot

Copper conductor seatMovable contact surface

with water film made of pure copper, 4 sets

Tank solution stirrer and circulation system

6” Ejection pipe, 2 pcs, made of hard PVC.

Plate type heat exchange30 m²,SUS316L, 1set

Acid pump 2 sets100 m³/h,25m,

Pipes Hard PVC,6”,Pressure 1MPa.

Valve Hard PVC,6”,Butterfly valve, Pressure 1MPa.

Automatic temperature control 1 set.

Acid Recovery System 2 Sets(Tank 12 and 14 shares1 set)

Production out put6000 ton/year

Surface area treatment capacity490m²/hr

Working time24hr/day

Drag out volume140cc/m²

Al ions treatment capacity 110kg~120kg/day

Working methodAutomatic

Scrubber for waste gas(Share with tank 12,13,14)

Equip withScrubbing towerDiameter 2.6m×6m,2 sets

10hp rinsing pump 1 set.

Exhaust fan 12000m3/h ,SUS316L,hard PVC air pipes and tower inlet hood,1set

Gas out let piping1set, PVC tower exhaust hood 1 set,collection bag140pcs.

Bleed valve and pipe4″,PVC

Water valve and pipe2″,PVC, Top Water.