Home  >  Apparel & Textile Machinery  >  Cap Making Machine Parts

1.AMS4928 25mm Titanium stick, 2.material:GR1,GR2,GR3,GR4,GR5,GR7,GR11, 3.Size:OD5.0-200*Length 6000mm, 4.Specification:AMS 4928 - details see: https://www.machineto.com/ams-4928-25mm-titanium-stick-10258859

AMS 4928 25mmTitanium stick specifications:

Titanium bar

Product	Size(mm)	Grade	Specification
Titanium Bars	Φ5mm~300mm Length≤3600mm	Gr1 Gr2 Gr3 Gr4	ASTM B338,F67
		Gr7 Gr11 Gr12	ASTM B348, F136 ,ASME SB348
		Gr5	ASTM B348,F136 ASME SB348,AMS 4928

1) Chemical industry

2) Petrochemical industry

3) Machining field, Automobile field, etc.

4) Desalination of sea water

5) Textile printing and dyeing

6) Mobile phone component field.

Type of Payment:

T/T, Escrow, Western Union, Money Gram, L/C, etc.

Payment Terms: the clients make negotiation with us.

Package:

OPP Bag are used to wrap up the bars and then put in the polywood case /wooden case with a layer of vibration pad.

Delivery:5-10days

TITANIUM BAR AND RING EXPERT

MAIN PRODUCT

Titanium forgings are our competitive products, including Titanium bars, titanium rings and flange rings.

EFFICENCY AND QUALITY

Technical Production department and Strict Quality Control System.

OUR ADVANTAGE

High Quality, Reasonable Prices and Low MOQ

Diameter	Diameter allowable deviation	Round,not more than
6.35~7.94	±0.12	0.20
>7.94~11.11	±0.15	0.23
>11.11~15.88	±0.17	0.25
>15.88~22.23	±0.20	0.30
>22.23~25.40	±0.22	0.33
>25.40~28.58	±0.25	0.38
>28.58~31.75	±0.27	0.40
>31.75~34.93	±0.30	0.45
>34.93~38.10	±0.35	0.53
>38.10~50.80	±0.39	0.58
>50.80~63.50	+0.79,0	0.58
>63.50~88.90	+1.19,0	0.88
>88.90~114.30	+1.58,0	1.16

The chemical composition of the bar:

Grade	Impurities ,not more than,%
	Ti (The lowest content)	Fe	C	N	H	O	Residual elements
							single	total
Gr1	99.1	0.20	0.08	0.03	0.010	0.18	0.10	0.40
Gr2	98.93	0.30	0.08	0.03	0.010	0.25	0.10	0.40
Gr3	98.81	0.30	0.08	0.05	0.010	0.35	0.10	0.40
Gr4	98.56	0.50	0.08	0.05	0.010	0.40	0.10	0.40
Residual elements should be include Al,V,Sn,Mo,Zr,Ni,Cu,Si,etc.

Tensil Test
Requirement MIN	Tensile Strength	Yield Strength 0.2%	Elongation	Reduction of Area
	[Mpa]	[Mpa]	[%]	[%]
	895MIN	828MIN	10MIN	25 MIN
Result	1010	905	14	37