Alloy Knife Type Road Marking Remover

Alloy Knife Type Road Marking Remover, Depth adjuster & Pressure adjuster, Emergency stop device, Protective device - details see: https://www.machineto.com/alloy-knife-type-road-marking-remover-10121344
Place of Origin:Henan China (Mainland)Brand Name:DYModel Number:DY-RMREngine:gasoline engine
Type:RemoverRemoval depth control:accurate pitch depth adjusterRemoval pressure control:Dial instruction pressure adjusterClutch protective device:Automatic clutch equipment
Cleaner joint:diameter 76mmRemoval width:180-620mmCertificate:CE,GostQuality Management System:ISO9001, ISO14001
Warranty:12months   
Alloy Knife Type Road Marking Remover
contact supplier for Alloy Knife Type Road Marking Remover


DY-RMR Alloy Knife Type Road Marking Remover

Zhengzhou Dayu machinery Co.,Ltd is professional construction machinery for Road Marking Machinery and road mark paint.

Description of DY-RMR Road Marking Remover

DY-RMR Alloy Knife Type Road Marking Removeris professionally used to clear away the broken, stained and wrong marking lines. The engine drives the removal cutter to rotate at high speed to clear away the old lines. The gasoline engine and the anti-abrasion tungsten alloy cutter are both imported with speedy and excellent performance. It is easy to operate and maintain.

Main Feature DY-RMR Road Marking Remover

1.Driving engine makes sure the higher removel speed and and the labor and time are saved.

2.More humanized design ensure the operator more comfortable.

3.Removed road surface is much cleaner than common remover.

Tools

Technical Parameter of DY-RMR Road Marking Remover

No.ItemSpec.
1EngineAmerica Briggs & Stratton 10.5HP air-cooled Gasoline Engine, and the throttle is controlled by handle brake.
2Removal WidthRemoval width can up to 620mm when left-right operation, 180mm when forward or back off
3Removal CutterTungsten alloy, the 24 teeth cutter is used forremoving thermoplastic line, the 48 teeth is mainly used forremoving cold plastic line.
4Depth AdjusterAdopt accurate pitch, control the depth accurately as required
5Pressure AdjusterFixed with depth dial; adjust the pressure of removal cutter to road surface. According to the conditions of road surface and different kinds of paint, adjust the removal pressure, the max pressure can insert into road surface
6Protective DeviceAutomatic clutch makes the cutter automatic clutch with removal shaft according to the engine speed and the conditions of road surface, which makes sure the high quality removal, fewer damages and extends service life
7Water Device(Optional)Greatly reduces the dust produced on job site.
8Rubber BushFixed Around the cutter can prevent dust and fragment during construction,makes sure the safe of operator
9Emergency Stop DeviceEquipped with emergency stop switch, which can stop the machine in short time.
10Parking deviceConvenient foot control parking system makes the machine in safety condition in any time.
11OperationPull, push, wave type operation
12Size & Weight1240*780*1100mm 230kg
13Optional systemcleaner, roll booster

You may also be interested in this/these product(s)

DY-STM Thermoplastic Screeding (Convex) Road Marking Machine

DY-HTPT Hand-Push Thermoplastic Pedestrian Road Marking Machine

DY-VHDP Vertical Hydraulic Double-cylinder Pre-heater

DY-MSAL Medium-size Driving Type Airless Road Marking Machine

DY-SSAL Small Sitting Type Airless Road Marking Machine

DY-HAL-I Hand-push Airless Road Marking Machine

DY-HAL-II Hand-push Airless Road Marking Machine

DY-SSTC-II Self-Propelled Structural Two-component Road Marking Machine

DY-BSTC Two-component Driving Type Road Marking Machine

For more information on our new product,

please check our website,www.road-marking-machine.com

Alloy Knife Type Road Marking Remover
Packaging Detail:export standard packing
Delivery Detail:10-20 Working Days

Related Product for Alloy Knife Type Road Marking Remover