adsorption heatless air dryer Dew-point:-40Deg.C,CE

1.Adopt technology of pressure swing adsorption ,regeneration without heat., 2.Short switch cycle. - details see: https://www.machineto.com/adsorption-heatless-air-dryer-dew-point-40deg-c-ce-10294430

Type:Heatless Air Dryer	Place of Origin:Jiangsu China (Mainland)	Brand Name:HOUSEWELL	Model Number:KXD
Voltage:220V/50Hz	Weight:120~16000kg	Certification:ISO9001:2008,CE	Warranty:ONE YEAR
Desiccant:Activated Alumnia	Dew Point:-40 Deg.C~-70 Deg.C	Air Loss:less than 14.5%	Configuration:Portable
Air Handling Capacity:0.7-510m3/min	Working Pressure:0.4~1.0Mpa(4~10bar)	Control Method:PIC controller	Special Gas Available:Nitrogen and Oxygen
Service:OEM/ODM	Market:Europe,South America,North America,Australia,Asia

adsorption heatless air dryer Dew-point:-40Deg.C,CE

contact supplier for adsorption heatless air dryer Dew-point:-40Deg.C,CE

3.Adopt PIC automatic controller.

4.Simple process, low failure rate,low investment cost.

5.Integrated delivery,Easy to maintain and operate.

6.Famous brand components to ensure long time running.

7.Need to consume a certain portion of purge air.

Housewell heatless desiccant air dryer systems operate on the principle of adsorption of water vapor from the air. The desiccant used is activated alumina, arranged in adsorption tower.

In the switching time, one tower is adsorbing while the other one is regenerating. When adsorbing, the compressed air flow through the air inlet valve, then flow into the tower to adsorb.

When regenerating, a portion of dried air is diverted from the main pipeline as regeneration gas, then through the regeneration control valve to reduce it'spressure. Regeneration gas flow by inlet valve into the adsorber to regenerating , then pass through the outlet valve and be discharged through the muffler to atmosphere.

•The only one authorizedBritish Brand HOUSEWELLmanufacturer in China.

•Excellent moisture absorption capacity, Low dew point dry air can be supplied continuously:

-70Degrees Celsiusultra-low dew point aircan be reached especially in the environment withlow temperature and low humidity.

•Famous brandimported for main components.

•Sold inEurope,South America,North America,Australia,Asia.

Working pressure 4 -10 bar Switch time 5-10min

Inlet temperature ≤45°C Pressure drop ≤ 0.21bar

Ambient temperature ≤45°C Desiccant activated alumina

Pressure Dew point ≤ -40°C Inlet oil content ≤ 0.1ppm(w)

Air loss 14.5% Power supply 220V/1PH/50Hz

Special voltages,110V/1PH/60HZ

Molecular sieve desiccant

Mounted air filters

Higher working pressure up to 400bar

Dew point as low as -70°C

Higher inlet temperature up to 55°C

Higher protection grade up to IP65

SIEMENS PLC controller

Dew point transducer

Stainless steel pipes lines and fittings

Stainless steel pressure vessel

ASME certificated pressure vessel

Different inlet/out connection

Special gas, such as nitrogen and oxygen

Housewellheatless desiccant air dryeradopts European the most advanced technology by PIC microprocessor control.The key components use the famous brand to ensure running steadily,operating efficiently with PLC display.Housewell heatless desiccant air dryerused in a variety of lithium battery,pharmaceutical industry,precision instruments,brewing technique,food industry,film industry,aerospace industry,electronics industry,chip industry and etc.