AC Servo Driver/ Servomotor driver (Servo system) ED620

AC servo driver/ Servomotor driver ED series

-XA-G-000

3-phase AC380V±15%

50Hz-60Hz

DC24±10%,2A

DC24±10%,10mA

DC24±10%,0.5A

-10V~+10V

If the system generates an over-voltage alarm when it starts or stops sharply, add an external braking resistor to absorb the feedback Wenergy of the motor

DC670±5V

DC710±5V

DC410±5V

300X166X115.5

300X166X125.5

Working environment

4.6

4.5

0~40°c

-10~70°c

5~85%

2

IP20

Installed in a dust-free, dry, and lockable environment (in a electrical cabinet, for example)

Vertical installation

No power limit under 1000m

86~106kpa

General functions

An internal space of 16.5 KB is provided for 256 sequences, which can save a controller on some occasions

3 external digital outputs (24V,0.5A),the target position to output or alarm output function can be implemented by internal programming;

8 external digital inputs, supporting internal sequence calling via the input interface and positioning function

(input delay: about 1 ms; input current: about 4 mA)

ne differential analog input, implementing control over motor speed and position by analog input; input voltage range ± 10V, input delay: about 0.1 ms

Two independent analog outputs, capable of monitoring the change of internal objects

Four internal comparators, with the comparison results to be used to trigger program sequences

Supporting the function of triggering sequences by timer or events

Four groups of internal counters, which can be set to trigger sequences

An internal calculator can be used for data duplication, addition, subtraction, multiplication, and division, and logic operation

The ECO2WIN software enables a user to monitor operation parameters such as speed, position and current on a PC

In a master/slave control mode, the motor encoder signal or master encoder signal can be the input for the slave signal encoder, with a maximum output frequency of 2 MHz

Programmable to be pulse/direction signal control, CW/CCWW control, electronic gear or electronic cam control (5V signal), with a maximum output frequency of 2 MHz

Incremental A, B, Z , /A, /B, /Z signal

9.6K baud rate, supporting a maximum of 15 sites, and supporting direct communication with a PC with the ECO2WIN software, or direct communication with an eView touch screen or text

38.4K baud rate, supporting a maximum of 15 sites, and communication cables with a length up to 400M

Maximum baud rate of 1M, and supporting a maximum of 127 sites

Maximum baud rate of 12M, and supporting a maximum of 127 sites