Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Arc Welders

1.AC/DC MMAinverter TIG welder ,CE approved, 2.Duty cycle up to 60% & efficiency up to 80%, 3.Specialy for welding aluminun - details see: https://www.machineto.com/ac-dc-welding-inverter-mma-200-10133946

welding inverter mma 200

Features:

*Quility suqare wave power supply ,stable arc ,HFarc stabilization not necessary

*Concentrated heat ,easy to fill in the wire ,especially suitable for wire welding in industry ,etc

*Foot pedal controller connection facilitates welder's operation

*Built -in alarming and protective circuits are provided to prevent over current , over heat ,over *voltage ,low voltage ,etc and ensure safe operation

*High duty cycle ,continuous operation without interruption at large current is available

*Suitable for welding of various metallic materials suchu as alunminum ,alunminm alloy ,carbon *steel ,stainless steel , copper , titanium .etc.

SUPPLY:

OEM sevice offered, Free spare parts, Technical help to exporters, Design Service Offered, Buyer Label Offered .

MAIN MARKET:

Europe, South America , Southeast Asia, Mid East ,North America.

ACCESSORIES:

With welding torch,earth clamp,electrode holder,mask,brush.

CERTIFICATE:

CE,ROHS,GS,ISO9001

ITEM	TIG 200P AC/DC
Power voltage(V)	1ph AC 220V +-15%
Frequency(HZ)	50/60
Rated input current (A)	28
Output current range (A)	TIG 10-200 MMA 10-150
Delay times(S)	1-10
Fall times(S)	0-10
No-load voltage (V)	56
Rated duty voltage (V)	TIG 18 MMA 26
PULSE FREQUENCY(Hz)	0.5-5
PULSE WIDTH(%)	10-90
AC BALANCE(%)	20-80
CUREENT FALL TIME(s)[4t]	0-10
Remote control	yes
Arc initiation way	HF
Duty cycle (%)	60
Efficiency (%)	80
Insulation class	F
Protections class	IP21S
Weight(KG)	20
Measurement(MM)	498*328*302
Cod.(NO)	112003

TIG WELDING DETAILS:

In TIG welding (Tungsten inert gas), the welding arc is formed between a non-consumable tungsten electrode and the work piece. The shielding gas is an inert gas that does not affect the welding process per se. Usually the shielding gas is argon and it protects not only the molten weld but also the electrode in the torch from oxygenation.

A filler material may not be necessary in TIG welding. The pieces can be fused also by melting the groove together. If a filler is used, it is fed into the molten weld manuallyandnot through the weld torch as in MIG/MAG welding. Therefore, the TIG welding torch has a completely different structure than a MIG/MAG torch.

Various TIG welding methods include, for example, the DC TIG welding method that uses direct current, AC TIG welding that utilises alternating current, and pulse TIG.

Welcome your inquiry sincerely!