Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Hoists

1. Hoistcapacity:500kg-20T, 2. Hoist Lifting Meter:60M, 3.Hoist with ISO9001, 4.Delivery time:15days - details see: https://www.machineto.com/500kg-20t-md1-double-speed-hoist-electric-lifting-crane-overhead-hoist-10097192

Description

TYPE MD1 wire-rope electric hoist is a kind of small-lifting equipment.It can mounted on single beam overhead cranes.Gantry Cranes, Jib Type CD ,electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbours, cargo storage area and shops,essential in raising working efficiency and improving working conditions.

1. Reducer
Third-class dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel;case and case cover with precise assembly and good seal are made of quality cast iron.The reducer is independent, so its easy to load and unload it.

2. Control Box
It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency,which ensures safe operation of electric block.Electric elements are of long service life and operational safety.

3.Steel Wire Rope
It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.

4. Conical Motor
The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor s load duration factor is 25%; the motor uses B frade and F grade insulation and its grade of protection isIP44/IP54.

5. Button Switch
Its hand-operated, easy to handle,and has two modes of cord operation and cordless remote control

6.Gear: by adopting Japanese technology,they are innovated symmetrical arrayed high -speed synchronous gears, and are made from international standard gear steel.Compared with common gears ,they are more wearable and steadier, and more laborsaving.

7.Chain: adopts high strength chain and high precision welding technology,meet ISO3077-1984 international standard;fits for gusty overload work conditions;takes your hands a better feeling multi-angle operation.

8.Hook: made of high-class alloy steel,it has high strength and high security; by using new design,weight will never escape.

9.Components:main components are all made of high-class alloy steel,with high precision and security.

10. Framework: slight design and more beautiful; with less weight and smaller work area.

11. Plastic Plating: by adopting advanced plastic plating technology inside and outside,it looks like a new one after years of operation.

12.Encloser: made of high-classed steel,more firmly and dexterous.

Hoists Enquiry information need:

1. Capacity

2. Lifting height

3. Lifting speed and running speed requirement.

4. Any other special requirement you need,like I beam type

Model	MD10.5T	MD11T	MD12T	MD13T	MD15T	MD110T	MD116T	MD120T
Capacity T	0.5	1	2	3	5	10	16	20
Standard lifting height m	6-12	6-30	6-30	6-30	6-30	9-30	9-18	9-18
Lifting Speed m/min	8(0.8)	8(0.8)	8(0.8)	8(0.8)	8(0.8)	8(0.8)	8(0.8)	8(0.8)
Running Speed m/min	20	20	20	20	20	20	20	20
Wire rope type	D-6X37+1	D-6X37+1	D-6X37+1	D-6X37+1	D-6X37+1	D-6X37+1	6X37+1	6X37+1
I-beam track type	16-28b	16-28b	20a-32c	20a-32c	25a-63c	25a-63c	45a-63c	50a-63c
Loop track minium radius m	1.5	1.5-4	2-4	2-4	2.5-5	2.5-9	3-4.6	3-4.6
Power supply	220V-440V,3phase,50/60HZ
Working Duty	Mid M3	Mid M3	Mid M3	Mid M3	Mid M3	Mid M3	Mid M2	Mid M2