Home  >  Farm Machinery  >  Farm Machinery  >  Harvesters

1.Used for reaping wheat,rice,bean,bush,reed,highland barley,weed,lucerne,etc., 2. CE EUROII certified, 3.loss ratio<1%. - details see: https://www.machineto.com/42-7-cc-ce-euroii-certified-wheat-cutter-10185964

42.7 cc CE EUROII certified mini wheat cutter

1.Applicable Scope:Plains,hills,terraced field,mud field and so on.It is used for reaping wheat,rice,bean,bush,reed,highland barley,lucerne etc.

2.Reap Efficiency:533-800 square meters per hour one person,loss ratio<1%.

3.Specification:

Engine Model	1E40F-5
Engine Type	Air-cooled, two-stroke, single cylinder
Engine Power	1.4kw/6500-7000rpm
Engine Displacement	42.7cc
Carburetor	Diaphragm type
Gasoline/2-cycle Oil mixing ratio	25:1
Working pole length	1550mm
Working pole diameter	26 or 28mm
Engine N.W	4.0KG
Engine Packing Size	31×24×35.5cm
Total N.W/G.W	7.2/8.4KG
Working Pole Packing Size:	166×10×12cm

4.Common sense of using and maintenance:

A.Normal safety precautions

a.Do not use indoor

b.Stay away from inflammables at least 1 meter

c.While fueling up ,forbid smoking,stop engine from performing and no fuel to overflow

d.Wear protection facilities such as eye protector, ear protector to operate.

e.Keep hands and feet away from machine before operating and stoping.

B.Check before operating

a.Check fuel level from external fuel tank. If it's low,please fuel up to maximum with gas:oil=25:1

b.Check air filter,clean it if there is dirty

c.Check throttle cable has free space at the bottom,and whether handle operates smooth and steady

d.Check blade,whether it has flaw or gap,it bends or wears out. Change a new one if needed.

e.Check the nuts whether they are loose,need to screw nut if loose.

f.Check cutter guard whether it is loose,screw nuts if needed.check protection guard whether it damaged or not,change it if needed.

C.Maintenance

a.Take spark plug apart to clean carbon deposit,measure (electrode) gap between 0.6mm-0.7mm

b.Check fuel filter and clean fuel tank,pour out the fuel,take out the filter then clean it softly,clear away the water the dirt in the fuel tank.

c.Check whether the heat sink is dirty through engine hood,clear it if it's dirty

d.Check fuel pipe,change it if it is aging or leak oil.

e.Change blade in time

5.Quality & Inspection

· Cooperated with good reputation suppliers.

· 100% check spare parts quality which produced from matching suppliers.

· QC checking each step from spare parts to production on the full of line.

6.Package

· Standard sea-worthy color carton.

· Use standard exported package if no special requirements, customers' packets are available basing on the quantity more than 300pcs.

7.Our factory

Other Products:

1. 32cc, 37cc,45cc, 52cc, 55cc, 62cc, 105cc chainsaws

2. 26cc, 33cc, 43cc, 52cc brush cutters

3. 25.4cc pole saw

4.A wild range of spare parts for chainsaws, including MS070,MS180 MS380 MS381 MS038 MS230 MS250 MS290 MS066 H137 H61 H268 H365 P350 P351 etc.

5. Brush cutter parts