2012 NEW IGBT Inverter AC/DC TIG/MMA WELDING MACHINE

aluminium welding machine:AC Pulse TIG DC TIG DC MMA, accessories inculded,Foot pedal ($23/pcs) suitable - details see: https://www.machineto.com/2012-new-igbt-inverter-ac-dc-tig-mma-welding-machine-10134713

Place of Origin:Zhejiang China (Mainland)	Brand Name:TOSENSE WELDING MACHINE	Model Number:AC/DC TIG200 MMA200	Arc Current:Pulse AC/DC TIG/MMA WELDER 10-200A
Pulse Frequency:50/60HZ	Pilot Arc Current:10A	Rated Duty Cycle:60%	Dimensions:600400560mm
Usage:AC Pulse TIG welding Aluminium	color:red,bule,yellow/OEM	CE BV:APPROVED	QUALITY:GOOD
DESIGN:GOOD	PACKAGE:Suitable for express shipping

2012 NEW IGBT Inverter AC/DC TIG/MMA WELDING MACHINE

contact supplier for 2012 NEW IGBT Inverter AC/DC TIG/MMA WELDING MACHINE

NEW TSE200 WELDING MACHINE 2-IN-1 WILL WELD ALUMINUM

FEATURES

1.TSE200 has 4 regulator knobs & is the perfect unit for welding aluminum & steel.
2.You can weld in either AC or DC mode, with AC mode you can weld aluminum,copper, brass, titanium, etc.and in DC mode you can weld steel, iron, stainless, etc.
3.Unit is built with the rmostatic protection, over-voltage protection, over-current protection, under-voltage protection& pedal control interface for safe operation.

1, multi-usage, dc manual welding/argon welding conversion, ac/dc conversion
2, ac argon welding function can welding aluminum workpiece, but long time welding 6 mm below the workpiece
3, USES the advanced IGBT inverter technology, fast dynamic response, stability and good reliability
4, resistance to electric network fluctuation ability, AC (320 v, 460 v) can be normal welding
5, cleaning pulse width, current attenuation, gas delay and welding current can be regulated optionally
6, with 2 t / 4 t function, convenient welding, enhance the efficiency of welding
7, three wind way design, improve the load duration rate
8, has the under voltage, over current, overheating protection function, safety performance is high

Model		AC/DC 200P AC/DC
input	voltage	AC220/230/240V 50Hz
AC TIG	No load voltage	60-80V
	Base Current Adjusting range	20-200A
	AC balance	30-70%
	AC square wave frequency	20-100Hz
	Rated Duty Cycle	60%
DC TIG	Pulse current adjusting range	5-200A
	Rated Duty Cycle	60%
	Current down-slope time	0~10S
	Base Current Adjusting range	5-200A
	Pluse Width Ratio	0.1~0.9
	Pluse Frequency	0.5~25Hz
	After flow time	1~25S
	Arc starting Mode	High frequency arc striking
DC MMA	No load voltage	60-80V
	Base Current Adjusting range	5-200A
	Rate output current	180A
	Rated Duty Cycle	60%
Efficiency		≥80%
Mass		14KG
Protection Class of enclosure		IP21S
Outline dimensions mm²		400X200X350

ACCESSORIES

4 meters welding holder

4 meters earth clamp

3 meters TIG torch

3 sets consumables,if you want more,please contact me!

HOW THE MACHINE WORKING

Plasma cutter accessories for the SUPER srise,WSME without CUT function

How to make the machine safe (Package)

How About the delivery

1,MORE 5 SETS (1 CUBE),WE WILL SEND THE GOODS BY SEA

2,SAMPLE ORDER (1-5 SETS) ,WE WILL SEND BY DHL ,UPS,CHINA POST

OTHERS

FAQS

Q1: Can I use this machine on 110VAC and 220VAC?

A: Yes, you can, this is a dual voltage unit.

Q2: What air pressure do I need to set for plasma cutting?

A: 70 psi at 2.5 cfm.

Q3: Do you also sell Tig Argon tank, Footpedal, Extra Cutting Consumables, Auto darkening helmet for this unit?

A: Yes, we do.

Q4: Do you sell the stick aluminum rods, circle cutting kits, 3 way air/argon switch valve?

A: Yes, we do.

Q5: What size of circuit break shall I use for this unit?

A: for 110vac, you need 30 amps and for 220vac, you need 20Amps circuit breaker.

Certification