Home  >  Farm Machinery  >  Farm Machinery  >  Cultivators

Kubota Power Tiller, 1.Engine:SR1P70F gasoline engine, 2.6.5HP,4.2KW, 3.Multifunctional tiller, 4.CE - details see: https://www.machineto.com/1wg-4-2-ls-l-6-5hp-kubota-power-tiller-10181202

1WG-4.2-LS-L 6.5HP Kubota Power Tiller

Engine of 1WG-4.2-LS-L 6.5HP Kubota Power Tiller

Model	1WG-4.2-LS-L
Matched engine	SR1P70F gasoline engine
Max. power	4.2KW
Horse power	6.5HP
Rotary speed	3600rpm
Oil consumption	0.4L/h

Matched Blades of 1WG-4.2-LS-L 6.5HP Kubota Power Tiller

Rotary plow
Tilling width	70cm
Tilling depth	15cm
Tyre code	3.5-4
Wheel base	310mm
Ground clearance	100mm
Plow depth(cm)
Rotary cultivation	10-17cm
Ploughing	8-12cm
Plow wide(cm)
Rotary cultivation	75cm
Ploughing	>12.5

Package Detailes of 1WG-4.2-LS-L 6.5HP Kubota Power Tiller

Gross weight	59Kg
Packing size(L*WW*H)	85*60*78cm
Package type	Carton
Clutch model	Claw clutch
Opposite sides of hexagonal shaft output shaft	23 opposite side

Safety Instruction and Maintenance of 1WG-4.2-LS-L 6.5HP Kubota Power Tiller

1. Check whether the height if engine lubricating oil (engine oil) meets the requirement or not before the startup.

2. Check whether the lubricating oil surface of travel case meets the regulated requirement.

3. Check the loosening of connecting bolts of each assembly and solve he found loosening.

4. Check the preparative items according to the requirements of operation instruction of engine.

5. After starting up the engine, grasping the left-hand clutch handle is representative of the implementation of operation and the release is representative of the stop of operation.

6. It is prohibited to start up the engine under the operation of clutch. It is prohibited to stop on the slope with a larger gradient.

7. It is prohibited to remove the mud guard for operation. Observe the warning signs.

8. Get done with the regular maintenance. Clean the travel mechanism after the 500-hour accumulative operation and replace the engine oil after the operation for 1000 hours. Moreover, check the gear, bearing and clutch and exchange for new parts if necessary.

9. Store the machine in the safe place in the door where is ventilated, dry and free from corrosive gas.