Home  >  Industrial Supplies  >  Laser Equipment Parts

130w Laser Tube Power Supply adopts high frequency design, top quality IC parts for major parts to ensure high performance. - details see: https://www.machineto.com/130w-laser-tube-power-supply-10231116

130w Laser Tube Power Supply

130w Laser Tube Power Supply adopts high frequency design, top quality IC parts for major parts to ensure high performance and lifetime. 130 W laser power supplies can be used to 100W – 150WCO2 laser tubefor kinds of industrial laser cutting system, very good compatible and high cost performance.

1. The main features of the 130w Laser Tube Power Supply :

* Stable performance:

Each power supply have been much more rigorous testing procedures, under full load high temperature (52~55 degrees celsius) 24 hours of aging, to ensure the stability of each power supply.

* Output voltage, current large (AC220V input, the maximum output current up to 40mA, voltage up to 50kv)

* Improve the laser power: 2000mm laser tube and supporting the use of peak laser power can reach 150W, the average power of 130W.

* Circuit design is reasonable, It’s a high-end laser engraving machine, cutting machine the best choice. At the same time, significantly extend the life of the laser tube.

* Good compatibility:

Can adapt to a number of manufacturers of CO2 laser tube, but also has strong adaptability and fast response, engraving, cutting effect of a good advantage.

* Control is simple:

Select high or low level control, the use of TTL-level control of the laser can start and stop. At the same time increase the protection switch, testing is through the external water and ventilation.

Laser power control is simple, you can use 0 ~ 5V analog signal control the size of the laser power, you can also use the PWM (pulse width modulation) signal to be controlled.* Protection function:

Power supply itself has open circuit protection, a good grounding in the case of protection, the power supply to short-term work in the open state, so to avoid the laser tube burst due to the damage caused by laser power supply, thereby enhancing the laser power supply of life.

* Special Features: (optional addition)

Power users do not need to open the shell, you can simply determine the laser power is working to distinguish between the failure of laser tube or power supply failure.

2. Specifications of 130w Laser Tube Power Supply:

Model Parameters		130W Laser power supply
Input	Input Voltage	AC220V±10% (Need AC110V products, ordering need indicate)
	AC frequency	47 - 440HZ
	Cold-state Surge Current	≤60A(AC220V input) ≤30A(AC110V input)
	Leakage current	≤0.7mA(AC220V input) ≤0.4mA(AC110V input)
Output	Maximum output voltage	DC50KV
	Maximum output current	DC40mA(depending on the laser tubes of different manufacturers)
Efficiency		≥90%( Full load)
Response speed		≤ 1ms
Control Interface		TTL multilevel switching control, effective level can be high and low selection (see control wiring diagram)
Insulation	Input--output	AC 1500V 1 minutes ≤10 mA
	Input--shell	AC 1500V 1 minutes ≤10 mA
	Output--shell	Connection
Insulation Resistance		≥50MΩ(DC500V)
Environmental Requested	Working temperature	-10°C - 50°C
	Storage of temperature	-20°C - 75°C
	Relative Humidity	Maximum 85% RH (non-condensing)
	Altitude	100,000 feet of work 200,000 feet of storage, does not work
Cooling methods		Forced air cooling (fan cooling)
Dimensions (L*W*H)		350mm*235mm*97mm

About US

Mactron Technology Co., Limited is a modern professional Hi-Tech enterprise, specializing in R&D, manufacturing, marketing of laser laser cutting and engraving machine and laser accessories for more than 10 years.

Mactron scopes of supply include: Co2 Laser Tube, co2 laser power supply,Laser Focus Lens, Laser Reflector Mirror, Industrial Water Cooler Unit, Laser Control System, Laser Cutting Head and other accessories etc.

Mactron's business tenet: "Win the market with advanced technology, Redound upon customer with the best service"

1. Quality

Mactron Technology Co,.ltd has passed ISO9001/2000 quality certificationhe. All of our products have CE Certificate, FDA Certificate and RoHS Certificate.

2. Price

Striving to improve efficiency and reduce costs, we have absolute predominance in price by selling products directly to end users on Aliexpress as a manufacture .

3. Service

For international custmer, we provide professional technician support on all our products by Trademanager whine 24 hours. Any problems about products, we will provide the step by step instruction for you.

4. Warranty&Return

We are happy to replace or refund money and aim to resolve issues quickly to meet your satisfaction.If goods arrive defective or damaged, you have 7 days from date of receipt to contact us. Please kindly provide evidence to us. Such as picture,video and documents.We will replace you a new one or refund you full money!

5. Shipping

With professional packing to avoid the damage, We have posted many products to worldwide safe and sound, including USA, Europe, Eastern Europe, South America, Middle East and so on. once receiving payment, we post the goods and provide the airway bill number for on-line tracking within 24 hours, including the weekend.

6.Feedback

Your satisfication and positive feedbck is very important to us. If you satisfy with our products and service, please kindly leave us 5 Star. If you have problems, please kindly contact us before leave any negative feedback, we would like to try best solve any problems for you!