1.4*8mm rfid animal management tags

1.4*8mm rfid animal management tags, IBio-glass Schott 8625, ISO11784/785, FDX-A or FDX-B, 1.4x8,2x12mm,sterilized packing - details see: https://www.machineto.com/1-4-8mm-rfid-animal-management-tags-10176275

Place of Origin:Shanghai China (Mainland)	Brand Name:Freevision	Model Number:rfid glass tag	Material:Bio-glass Schott 8625
Size:1.4x8,1.5x8,2x6,2x8,2x10,2x12mm,etc	Operating Frequency:125KHz,134.2KHz,13.56MHz	Chip IC:EM4200,EM4305,Hitag S256,NTAG203,etc	Standard:ISO11784/785
Format:FDX-A, FDX-B, HDX	Encoding:Yes, with ICAR number encoded	Application:animal identification/tracking	New product 1:1.4x8mm in FDX-A format
New product 2:NTAG203 HF NFC rfid glass tag

Product Key Words: rfid glass tag, aniamal glass tag management, 1.4*8mm rfid glass tags

The rfid glasstag with syringe 2.12x12mm and 1.4x8mm have been developed for subcutaneous injection, which is widely used for small animal identification. This glass tag can be used to identify any any pet like cat, dog, furret, horse, fish and exotic animal. All products conform to ISO standards and are available with parylene coating to prevent migration of the tag once implanted.

1.4x8mm now is the smallest sized glass transponder, widely used for tagging fish, mice, etc such very small animals; while 2x12mm is the common sized and popularly used on the market for dog, cat, horse, etc. At so far, we just developed a new product, 1.4x8mm in FDX-A format, as far as we know that, 1.4x8mm could only be FDX-B format because of the big rfid chip's size, so, we now are the unique manufacturer who can supply FDX-A glass transponders at the smallest size 1.4x8mm!

For rfid glass tags used for animal identification(or tagging animals), there are 3 standard:

ISO11784/785 FDX-A, FDX-B and HDX.

Here are the size for different format:

FDX-A: 1.4x8, 1.5x8, 2x6, 2x8, 2x10, 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm

FDX-B: 1.4x8, 1.5x8, 2x6, 2x8, 2x10, 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm

HDX: 2x12, 3x13, 3.85x23, 3.85x32, 4x34mm

In a word, RFID glass transponder tag is an easy solution for animal identification and tracking. Made of high quality Biocompatible glass, compaly with ISO11784/785 FDX A/B, HDX; our rfid glass tags are safety and could work with excellent performance, 5-8cm with our readers, or even longer upon readers' antenna and power.

Specifications:

PRODUCT CODE	rfid gass tag
Frequency	125KHz/134.2 ± 2 KHz
Standard and Protocol	ISO 11784/11785
Transmission Principle	Full Duplex (FDX-A/B), Half Duplex(HDX), EM ID
IC Type	T5577, EM4305, HITAG S256, CET5999, EM4200
Data Memory	330bits,512bits,256byte,1024bits, 64bits
Dimension	1.4x8, 1.5x8, 2x6, 2.12x8, 2.12x10, 2.12x12, 3.85x32, 4x34mm
Reading Range	6-10cm by our handheld animal reader H20-F-G1; 30-50cm upon our long range reader PI-80
Operating Temperature	-25^oC to 85^oC
Storage Temperature	-40^oC to 90^oC
Weight	95 ± 20 mg for 2x12mm; 34mg for 1.4x8mm
Write Endurance	> 1,000,000 cycles
Memory Retention	> 20 years
Case Material	Cylindrical Bio-glass Schott 8625
EMC	Not affected by Normal Electromagnetic Interference or X-Rays
Signal Penetration	No known Blockage by non-magnetic material
Power Source	No Battery Required

What is RFID Microchip?
RFID Microchip also known as a glass transponder, is about a size of a grain of rice. The transponder which is coded with a permanent code, is implanted under the animal's skin for identification purpose. Using Radio Frequency, the animal can be identified by using a RFID scanner.
What are the benefits?
1. Unique identity for every livestock and pet.
2. Import and export control.
3. Lost pet can be easily traced back to it's owner.
4. Veterinarians are able to keep the animal's heath record.
5. Easily implanted and no impact on the animal.
6. Suitable for use in extreme conditions.
7. Coupled with software, the RFID tag is a must inmanagement of animals, either livestock or household pet.
Why are our Microchips much cheaper?
1. Factory strategically located.
2. Direct from our factory.
3. Sophisticated cost savings production process.
How we deliver superior quality Microchips?
1. Equipment and Machines imported from Germany, Japan, USA etc.
2. Strict quality control.
3. Microchip tested and inspected individually.
4. Use only top quality material to manufacture microchips.