Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Coating Machinery

ZJP Electrostatic Powder Coating Line, 1.Heating:electric,coal,diesel,etc., 2.Long workpieces dedicated, 3.Easy to operate - details see: https://www.machineto.com/zjp-electrostatic-powder-coating-10162120

ZJP Electrostatic Powder Coating

Structural Features:

Room combined by cold-rolled steel sheet and assembly. Easy structure. Clean conveniently. Adopt side suction ventilation device and together with anti-dust lighting. Convenient for spraying.
Adopt assembly structure, outside with corrugated plates, oven is tight, solid, beautiful and with good insulation properties. Temperature use conventional electrical control, with the hot air circulation to ensure the uniformity temperature. Fully to meet 180°C±5°C powder curing requirements. It can spray surface of different light pole, signal pole, high mass pole. Also for dry processing. After spraying and drying, the surface is colorful, strong adhesion and durability.

Parameters:

SN	Name	Value		Unit	Remark
1	Spray Length	14		m	Can Be Lengthened Or Shortened
2	Max.Spray Pipe Diameter	φ600		mm	Can Increase
3	Max.Spray Pipe Weight	500		kg	Can Increase
4	Consume Power(Select One)	Electric Heating	180	kw/h	User Must Select One Heating Type According To Their Local Energy
		Fuel Type	22	kw/h
		Coal-fired Type	20	kw/h
		Gas Type	20	kw/h
5	Powder Curing Oven Dimensions	L	17000	mm
		W	2100	mm
		H	3200	mm	The Highest Point
6	Size Of Mobile Powder Room	L	4800	mm
		W	1300	mm
		H	2400	mm
7	Machine Weight	20500		kg

Major Dispositions:

(1)power room
(2)high voltage electrostatic generator
(3)powder spraying system(four sets)
(4)powder pumping and recovery system
(5)0.5t hanging conveyor system(1 set)
(6)traversing car
(7)oven curing drying tunnel system(include electric heating,fuel type,coal type and gas type)
(8)electrical control system(1set)

ZJP Electrostatic Powder Coating :

Model	ZDXB-6	ZDXB-9	ZDXB-12
Milling perspective	0-450	0-450	0-450
Processing plate thickness	6-50	6-50	6-50
Milling hypotenuse of a maximum width	20	20	20
Milling hypotenuse of a maximum width	1.2*7	1.2*11	1.2*1.5
Hydraulic pressure	1.5	1.5	1.5
Feed motor power	1.1/1.5	1.1/1.5	1.1/1.5
Milling motor power	2.2/3	2.2/3	2.2/3
Pump motor power	3	5.5	5.5
External dimensions	7820*2240*1950	10820*2240*1950	16820*2240*1950

ZJP Electrostatic Powder Coating:

If you are interest in our products or our services, please contact us, you will get the best reliable products in reasonable prices !