Z purlin roll forming machine

Z purlin cold roll forming machine , C Z Purlin roll forming machine , Z cold roll forming machine

Technical parameter:

1) Max coil width: 640mm

2) Material thickness: 1.5-3.0mm

3) Main motor power: 18.5kw

4) Dimension: about 8600mm*920mm*1300mm

5) Total weight: about 8.6T

Technical specification

1) Decoiler

Manual; un-powered; single head

Max capacity: 5t (hydraulic one is optional)

2) Flattening device: it is used to make the material flattening before feeding into the roll forming machine.

3) Roll forming machine

Shaft diameter: 76mm

Shaft material: high grade 45# steel, heated and quenched treatment HRC60-620

Forming station: 13 main steps, and 7 auxiliary steps

Roller material: GCr15 bearing steel

It can make all the size of profile in the table through changing the position of rollers.

Forming speed: 0-10m/ min

Voltage: 380V, 50HZ, 3 phase

Machine structure of the machine: 36# “H” steel

Thickness of frame stand: 16-18mm

Transmission: by chain

4) Hydraulic cutting:

Stop to cut, post cut

Cutter material: Cr12

Cutting length error: 4mm

Hydraulic power: 5.5kw

5) PLC control system

Using the Mitsubishi PLC control system from Japan control the quantity and length automatically, LCD screen.

Frequency converter to regulate the turning speed

Operation flow: decoiling → feeding guide → flattening → roll forming → punching for horizontal or vertical holes → measure length → cutting → panel to the supporter

Note: Pre-punching or post-punching is determined by detailed place of hole.

l Business Conditions

Payment Term: 30% T/T in advance, 70% T/T at the sight of B/L Copy.

Delivery Time: Within 65 Work Days after receipt of the down payment.

Warranty: 12 months since the date of B/L.

Installation and Commissioning: 1 or 2 professional engineers will be sent for installation and commissioning, and the buyer should pay 100 USD/day for each one, besides, the accommodation and the round-trip ticket are also on the buyer’s side.