Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drum Drying Equipment

drum-type feed dryer machine:, 1.high quality and efficiency, 2.reasonable designed, 3.low investment and quick returns - details see: https://www.machineto.com/xinxin-drum-type-feed-dryer-machine-10287924

Xinxin drum-type feed dryer machine:

Introduction of the drum-type feed dryer machine:

The drum-type feed dryer machine also called quartz sand (sand) drum dryer, mainly used for drying dry certain humidity and particle size range of materials, widely used in shoddy school, sweet potato slag, corn straw, vinasse, fruit slag, grasses, and chicken,

cow muck material such as drying dry. Feed the dryer has big capacity, low energy consumption, low maintenance.

Working principle of the drum-type feed dryer machine:

The drum-type feed dryer machine use belt conveyor or dou type hoist to hopper, then by hopper of feeding machine through charging pipe into the feeding. Feed the dryer equipment feeding the rake of pipe must be greater than the natural inclination of

material, so that the material smoothly enters in dryer. Dryer cylinder is a horizontal and slightly into tilt of the rotating cylinder. Material

from higher end to join, the heat from the low end into the body, and the material into counter-current contact. Wet materials in the feed the dryer the cylinder body in the process of moving forward, directly or indirectly got the heat of the body

heat, reduce dust to material pollution.

Let the wet material to dry, and then in the material end the machine or screw conveyor belt is sent out. In the feed the dryer the

cylinder body with copy on board, the material copy up and then, make the material of surface in contact with air, in order to improve

and promote the drying rate material forward. Heat body typically divided into the hot air and black, etc. Heat body after the dryer,

generally need to cyclone dust collector in the gas with material capture down. For further reduce exhaust HanChenLiang, also

should pass bag filter or wet dust again after discharge.

Parameters of the drum-type dryer machine:

Model (mm)	Gradient (%)	Speed (r/min)	Temperature (°C)	Power (kw)	Handing capacity (t/h)
MGT600	3-5	3-8	≤850	3	Refer to the raw material and other details
MGT800	3-5	3-8	≤850	4
MGT1000	3-5	3-8	≤850	5.5
MGT1200	3-5	3-8	≤850	11
MGT1500	3-5	3-8	≤850	15
MGT1800	3-5	3-8	≤850	18.5
MGT2000	3-5	3-8	≤850	22
MGT2200	3-5	3-8	≤850	30
MGT2400	3-5	3-5	≤850	37
MGT2600	3-5	3-5	≤850	40
MGT2800	3-5	3-5	≤850	55