thermostat for egg incubator
General Description of WY Capillary Thermostat for Egg Incubator:
Model WY capillary thermostat for egg incubator has been widely used for constant temperature device, such as couveuse, incubator,egg incubator, fish tank ,etc. It has high temperature precision and reliability, short temperature differential.
Model WY capillary thermostat for egg incubator is rated at 16 amps, dimensions as per the drawing below, standard capillary length is approx 1000mm (250-3000mm optional), sensor tube size has 3mm, 4mm, 5mm, 6mm available . Single Pole Single Throw and Single Pole Double Throw is available according to the various applications.
Here’s Why You Should be Using Our WY Capillary Thermostat for Egg Incubator in Your Product:
1. High temperature precision: 35~41C (or as per your requirement)
2. Short temperatrue differentail : 1~5C(or as per your requirement ).
3.Temperature adjustable through adjusting shaft or to be fixed .
4. Auto-reset.
5. Snap-Action electric switch, which has features of agile action, less arcing, long service life aswell as less radio disturbance.
6. To prevent temperature slow drift,96 hours burn-in test has been 100% done. So our capillary thermostat has high reliability and steady performance.
7. Long life: more than 100000 cycles.
9. Accessories, such as knob, bezel, capillary sealing screw etc. available .
10. Strictly comply with UL, CE, CQC, RoHS standards.
You can be confident, because we believe in quality. Your choice is right!
Below is the Details Specifications of WY Capillary Thermostat for Egg Incubator:
| Temperature range | 35~41C (or as per your requirement) |
| Temperature differential | 1~5C(or as per your requirement ) |
| Electrical rating | AC250V 16A for C-1, AC250V 4A for C-2 |
| Length of capillary | 250-3000mm optional |
| Material of capillary and sensor tub | Stainless steel and copper optional |
| Diameter of sensor tube | 3mm, 4mm, 5mm, 6mm |
| Wiring diagram | Single Pole Single Throw (SPST)
Single Pole Double Throw (SPDT) |
| Direction of terminals | As per the drawing below |
| Material of terminals | Brass with Nickel plating |
| Min. capillary bend radius | 5mm |
| Total angular of rotation shaft | 00~ 2700( or fixed temperature design ) |
| Resistance on contacts | Less than 50mΩ |
| Insulation resistance | ≥ 100M Ω /500V |
| Hi -pot test | AC2000V 1minute 0.5mA |
| Max. housing temperature | 125 °C |
| Max. temperature of the sensor | High point temp.+30 °C |
| Torque of adjustable shaft | 2 ~ 5N.m |
| Test condition | Rate of temperature change ≤ 1K/2 minutes |
| Life cyles | 100,000 cycles |
| Certificates | UL,CUL,VDE,CE,CQC,RoHS |
If you have any question,request, or above shown don't meet your requirements, please feel free contact us to discuss specific requirements . You can get our service every time, all the time. We believe our product quality and service attitude will make you satisfied with us.
Lots of other capillary thermostats and spare parts are available. Now please send us an email and tell us what's your exact request.
Drawing and Size of WY Capillary Thermostat for Egg Incubator:
Other Related Products of WY Capillary Thermostat for Egg Incubator:
A View of Work Shop:
