with magnetic Particle Brake

High quality with low price magnetic Particle Brake

Magnetic particle clutch | brake operation principle:

When no current flows in the magnetic coil, powder is being attached to input drum side by centrifugal force as separate input drum and output drum. So the torque is not transmitted. If coil is exited by electric current, magnetic flux is generated, and then torque is transmitted by the friction between powder and working side.

Magnetic particle clutch| brake features:

1) Excitation current and transmitting torque are almost in proportion, also transmitting torque is controlled with wide ranges.

2) Regardless of slipped rmp, torque is excellently transmitted.

3) Torque by residual flux is very little and stopping stability is excellent.

4) It can operate with slipping state, for large capacity cooling with heat.

5) Take short repair time as it is dry-type, so can use it for long time without any adjustment.

6) It is friction clutch of based on the powder.

.Powder brake (PB)
The series of PB brakes is structures which inbreathe the compressed air to interspaced, and release the heat to exterior. This type can use also as natural cooling, For sake of enhance the cooling effect can set up air blower in the side of drive, therefore it is permit that continuously power is variational according to rotate speed.