Brief Introduction for Pyrolysis Equipment
Quick details
1.Q245R boiler plate
2.3 steps to control quality
3.energy saving and low cost
4.environmental friendly and no pollution
5. The raw material: waste plastic
6.Average crude oil: 45%
7.Average carbon productivity :30%
8. Average steel productivity: 10%
9.Average gas productivity: 5%
Tyre Pyrolysis machine oil output
6 models of the waste tyre refining machine
The raw material are processed by machine
1, Industrial waste , allow multiple waste mixed simultaneously (more than 70%, but suggest PE, PVC less than 10%)
2, Waste rubber tyre
3, Waste cable skin,
Main power for whole system
Machine 3D drawing flow chart
Main parts of machine
Reactor:
1. The gear is separated from reactor, instead of welding on reactor. So it will not be destroyed by heating.
2. The reactor is supported in a centre line by rollers. It will remain stable while running.
3. Auto-welding, both inside and outside.
4. Made by special boiler plate Q245R/ Q345R. Security and long service life.
5. Made by rock wool insulation board. Save fuel and ensure heating effect.
Oil-water separator
1. Water from raw material will be separated here.
2. Water sealing design prevent tempering. Ensure safety.
3. Heavy oil will be collected here.
Cooling system :
1--Coil cooling system : there are 22 pipes lied in the water pond, oil gas can be cooled , and high oil yield .
2--Condensers: we supply 3 condensers, each has 44 pipes inside the condensers.
Dust removal device:
1. Dispose of flue gas caused by heating reactor using coal, wood, oil or natual gas.
2. Environment protection.
After-sale service:
1, we are responsible for machine installation and debugging
2, Engineer will assist buyers producing and training workers.
3, Guarantee period for equipment (including accessories) is 2 year.(Except personal factor damage and quick wear -part). For all standard and non-standard parts, if damaged under normal production during work according to our manual, we will offer deploy unconditionally. For reactor Guarantee period is 4-8years
The technical parameter
| 1 | Equipment type | 2200-6000 | 2200-6600 | 2600-6600 | 2800-6000 | 2800-6600 |
| 2 | capacity | 5 ton | 6 ton | 9 ton | 10ton | 12 ton |
| 3 | plant power | 8-11kw | 8-11kw | 12-17kw | 12-17kw | 12-17kw |
| 3 | material | tyre/rubber/plastic |
| 4 | Structural form | Horizontal rotation |
| 5 | Operating pressure | Constant pressure |
| 6 | Reactor speed | 0.4 turn /minute |
| 7 | Mode of cooling | Water cooling |
| 8 | Kind of drive | Internal gear drive |
| 9 | Noise dB(A) | ≤85 |
| 10 | Heating mode | Direct heating |
| 11 | Dispatch period | 15 days after getting first payment |
Our equipment has lot's of advantages
more pictures
Welomce to inquiry us all times!!