Home  >  Raw Material Processing Machinery  >  Rubber Product Making Machinery

1.Low energy consumption, 2.Convenient in maintenance, 3.Simple operation, 4.Decreasing labor - details see: https://www.machineto.com/washer-gasket-cutting-machine-120cutting-times-min-10339138

-- It can be used for rapid cutting moldn of various rubber and silicon gelgasket. , ring-shaped or cylindrical products. With the cutting operatio precision of 0.001mm, reset precision of 0.01mm, product error of +- 0.3mm and finishe degree of cutting surface of 0.8, this machine may greatly save te multi-cavity scrap edge.

can be usd as rapid cutting molding of each rubber, silica gel gasket and circular tubular parts

standard Vacuum Automatic Rubber Gasket Cutting Machine

Rapid cutting molding of each rubber, silica gel gasket and circular products , which can manufacture the rectangle products (such as gasket) of original single-cavity mold and a multi-cavity molds section through altering mould, can make the products into a mode of a cavity and cylindrical molding. Making use of equidistant cutting molding of our products can greatly improve efficiency (saving multi-cavity filling and liberating of labor) and advance (due to the difference of multi-cavity and mould aging). The precision of this cutting running accuracy is 0.01mm, resetting accuracy is 0.01mm, deviation ±0.03mm, cutting
surface luster can reach , these can greatly save multi-mode cavity side of waste materials.

Features

1. Standard adopting program to control auto-off material (lessening trivial process of altering clamping apparatus). When the products are finished cutting, off-material device that installing on the head of machine will stretch out automatic to push out the product. And collect the products those have been cut through collection box.

vacuum adsorption and blowing, making it convenient to install products, greatly improving efficiency.

electric machine, greatly improving cutting precision.

, all can be seen clearly and it is quite easy to operate.

can be installed with . You can freely change requested blades according to your products specification. And your cost of blade can be reduced to the lowest.

6. All electrical components and pneumatic components adopt import and domestic well-known brand products, assuring the stability and reliability of long-term usage.

2. Route and speed of feed can be adjusted. The route of feed can be adjusted by operating limit switch and bumper, the speed of feed can be controlled by throttle of cylinder and the speed of cutting into products can be adjusted by the knob of bumpers bottom.

3. The travel rate of knife rests axial can be adjusted between 0mm/s and 200mm/s.

5. Time of cutting feed can be adjusted to be delayed.

6. Enabling gate can be opened and closed automatically.

Technical parameters

Cutting Efficiency	120 Times/Min
Working Rotate Speed	02000r/min
Cutting Precision	≤±0.03mm
Cutting Diameter	Φ10mmΦ220mm
Cutting Length	Standard≤100mm ≤350mm
Cutting Thickness	≤12mm
Tool Specification	(1) circular knifeΦ76×Φ25.4×Φ0.3mm 2strip knife70×8×0.3mm
Compressed Air Consumption	20L/min
Atmospheric Pressure	0.5MPa0.8MPa
Working Vacuum Degree	≤-0.035MPa
Power Source	AC220V±5%
Total Power	2KW
Device Weight	≈560Kg
Device Size (length ×width ×height)	1150mm×750mm×1120mm