Wall Plastering Machine (CE certification)

Newest Wall Plastering Machine (CE certification)
Overview

Our wall plastering machine is suitable for the construction industry.It makes rendering easier,faster and effortless

compared with manual application.Our plastering machine also can work with different mortar which bring it to a

smooth,flat finish with adjustable thickness to suit each application.

Features

1,Our machine utilize the conveyor taking mortar forwardly and upwardly,It can plaster to the roof by all means(no leave 1mm).In this aspect our machine is unique.The conveyor can take mortar or stop in any position by hand control.

2, The spatula can change the angle at will,plastering the wall by rising large angle,sharpening and pressing by angle decline,thus guaranteed zero vertical error and plastering to the roof.

3, The hydraulic telescopic rod can make the machine installation in 10 second and the chassis is not stress.When you want to move the machine you just can release the rod as moving jack..

The main rod declined by gravitation,the bottom life automatically.This kind of installation is the most fast and stable one.

4,The width of spatula is designed according the width of the door,The machine can go into the room freely.It can reach the inside corner and the exposed corner.

5,There are two min-vibrators after the spatula,thus you need not to worry about Hollowing and adhesion.

6,Our machine adopted the universal wheel after sealing and it can easily move to any place you like.

7,This machine is totally artificially designed.

Safe Protection Design1,Before changing to the plastering angel,the startup switches of spatula is closed to avoid damage the spatula.

2,If the electrical machinery reverse,the machine can cut the power automatically to protect the wirerope from mass.Just commutate the two direction switch.

3,If the machine got stuck when declining,the power will be butting automatically to avoid wirerope came messy.

4,Due to long-term exposure,the wirerope may came rough.If the wirerope broken,the machineM would decline 20cm in abnormal speed and then it would be stuck.

6,The front heavier design make the machine do not backward also if the hydraulic cylinder became flexible.

Technical Parameter