VIKRANT As per drg chain hoist

• ELECTRIC WIRE ROPE HOIST

There are two type of hoist

MONORAIL TYPE UP TO 15 TON CAP.

Fix Suspension type

Hoist with Hand Push trolley type

Hoist with motor driven trolley type

Trolley can be adjusted for various flange width

DOUBLE RAIL TROLLEY TYPE (CRAB) UP TO 100 TON CAP

Compact Design & high Safety Level

Wide selection of operation speed

Easily Accessible cut down repair time

VIKRANThoist are manufactured in compliance to IS 3938 to meet Class II, III, & IV duty applications.

Hoisting machinery consists of Motor, Brake, Gear box, Rope Drum, Wire rope, Control Panel etc... Hoisting machinery serves the purpose of moving loads vertically as well as transferring them one point of the area covered by the machinery into another.

MOTOR

Motors are totally enclosed, hoist duty with F class insulation , 150 starts/hour, 40% class duty cycle of reputed make like Bharat Bijli / Kirloskar/Crompton/Siemens /Rotomotive (Italy) / BCH Make

Gear Box

All gearboxes used in the cranes are totally enclosed in dust proof construction. Gears are machined from Alloy Steel and Hardened. All Gearing is enclosed in a rugged steel housing and is oil / grease splash lubricated.

BRAKES:

Suitable Electro Magnetic AC Disc / Electro Magnetic AC Shoe Type / Electro hydraulic Thruster type brakes are provided in all motions. These are automatically released when the motor circuit is on & are applied when the motor

circuit is off. This features works as a positive safety device as the brakes automatically comes into operation when the power supply fails.

ROPE DRUM & ROPE GUIDE:

Steel drums are precision machine cut fabricated from seamless pipe / plate having either single or double grooved configurations. Hoists are equipped rope guides to prevent over lapping of the rope on the drum and to extend rope life.

LIMIT SWITCHED:

Upper and lower hoisting limit switches are standard equipments.

BOTTON BLOCK:

Bottom Blocks are equipped with protective guard around the rope opening. Shank type forged Hook is as per IS 3815 swivel on thrust bearings.

CONTROL PANEL:

The easy to service control panels consists of standard make of heavy duty contactors, over load relay, transformers and other associated equipments. All Hoists are suitable for three phases 415 v + - 10%, 50 Hz, AC supply, other power supply types on request.

OPTIONAL FEATURES:

The following features can be supplied on request.

1) Variable Speed Control/Micro Speed arrangement through Frequency Inverters/ Variable Frequency Drives

2) Radio Remote Control

3) Suitable for curvature type other options are available on request.

ALSO AVAILABLE:

1) Higher Lift Hoist

2) Flame Proof Applications