Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Other Machine Tool Equipment

vertical machining center, X/Y/Z travel: 1500 / 510 / 510 mm - details see: https://www.machineto.com/vertical-machining-center-10131620

vertical machining center

Designed for high productivity machining

Model: VMC-1500L

(1) Machine specifications:

Model		VMC-1500L
Travel	X axis travel	1,500 mm
	Y axis travel	510 mm
	Z axis travel	510 mm
	Spindle nose to table	120-630 mm
	Spindle center to column front	627 mm
	Column rail face to table center	353-863 mm
Work table	Work table size	1,570 x 500 mm
	Max. loading	600 kgs
	T-slot no / pitch	3/150 mm
	T-slot width	18 mm
Feedrate	X/Y rapid feedrate	24,000 mm/min
	Z rapid feedrate	24,000 mm/min
	Max. cutting speed	10,000 mm/min
	Ball screw	40 x P12
Headstock	Spindle motor cont. / 30min	11KW/15HP
	Spindle outside diameter	65 mm
	Spindle taper	BT40
	Spindle speed	8,000 rpm
ATC	Tool no & type	20 Umbrella
	Max. tool diameter	80 mm
	Max. tool length	300 mm
	Max. tool weight	7 kgs
General information	Machine weight	6,000 kgs
	Floor space (L x W x H)	4,200 x 2,600 x 2,700 mm
	Air pressure	5 kg/cm2
	Positioning	0.005 mm / 300 mm
	Repeatability	±0.003 mm

(2) Standard accessories:

1. Fanuc 0i-MD control	2. 20 tools umbrella type ATC
3. Coolant system	4. Auto lubrication system
5. Working & warning lamps	6. Toolbox and tools
7. Fully enclosed splash guard	8. RS-232 interface
9. Rigid tapping	10. Auto power off
11. Electrical cabinet heat cooler	12. M.P.G.
13. Power transformer	14. Leveling bolts and pads

(3) Optional accessories:

1. FANUC 21i-MB / 18i-MB control	2. MITSUBISHI M70 / 65S / M720 / M730 control
3. SIEMENS 802DSL/810D/840D control	4. Spindle speed 10,000 / 12,000 / 20,000 / 30,000 rpm
5. Spindle chiller	6. Arm type 24 tools ATC
7. Chip auger / chip conveyor	8. Coolant through spindle and tool
9. Tool measurement system	10. Workpiece measurement system
11. DATA server for FANUC controller	12. HPS for MITSUBISHI controller
13. 4th / 5th rotary table & control system	14. Spindle ring type flushing

(4) Rigid construction

1. All major parts are built with Meehanite cast irons, featuring high tensile strength and long

term wearing resistance.

2. High precision and super rigid linear guides on all 3 axes give longer sustaining accuracy and

long service life.

3. Pre-tensioned, high precision ball screws on all three axes are directly drive by servo motors

to provide perfect rigidity for all kinds of machining applications.

4. All slide ways are completely covered to prevent coolant and chips damaging and to extend

machine service life.

(4) Available magazine

Tool magazine capacity	20 tools	24 tools
ATC type	Umbrella	Arm type
Max. tool dia	80 mm / 125 mm	80 mm / 125 mm
Max. tool weight	7 kgs	7 kgs
Max. tool length	300 mm	300 mm