Used Tyre Recycling Waste Tyre Rubber Crusher / Scrap Tire Crusher
Price on request
Pricing is provided on request — use the quote form below.
- Port
- Qingdao
- Minimum Order Quantity
- 1 Set/Sets
- Supply Ability
- 800 Set/Sets per Year
- Payment Terms
- L/C,T/T
Price on request
Pricing is provided on request — use the quote form below.
Something wrong with this listing? Report it
Waste Tire Crusher of Tyre Recycling Machine·1.saving energy,·2.nip is adjusted,·3.the roll is fluted roll,
| Condition | New | Place of Origin | Shandong China (Mainland) |
|---|---|---|---|
| Model Number | all various | Voltage | according customer's require |
| Power(W) | 45-75kw | Dimension(L*W*H) | 5064x2284x1978 mm |
| Weight | 7000-18000 kg | Certification | ISO 9001:2008 |
| Warranty | 1 year | After-sales Service Provided | Engineers available to service machinery overseas |
| Color | blue & green etc | Type | rubber crusher-tire recycling machine |
| Front roll diameter | 400-560 mm | Rear roll diameter | 400-510 mm |
| Working length of rolls | 600-760 mm | Max,nip | 8-15 mm |
| Production capacity | 200-1500 kg/hr | Details | Waste Tire Crusher of Tyre Recycling Machine · 1.saving energy, · 2.nip is adjusted, · 3.the roll is fluted roll, |
| Packaging Detail | under sea transportion standard |
|---|---|
| Delivery Detail | delivery in 30days after receipt deposit |
1.About our company:
Companies depend on the technical power, the strict scientific management expertise, product quality and good service, and won the majority of the customer's trust. many of the product is exported to the united states, canada, australia and india, indonesia and uzbekistan, etc.
Company management certification: ISO 9001:2000, ISO 17799, ISO 9001:2008, ISO 14001:2004, ISO/TS 16949
Our main products are plate vulcanizing press, two-roll mixing mill, rubber extruder, banbury intensive kneader, bale cutter, conveyer belt vulcanizing press, tyre reclaiming machines, rubber refiner, rubber cracker, etc. we especially specialize in the design and manufacture of the nonstandard products.
2.Details of machine
It consists of motor, gear-down reducer, driving gears, speed-ratio gears, front and back rolls, bearings, frame, cover, bed plate, adjusting pin device, emergency stop device, roll temperature adjusting device, lubricating device and material plate, etc.
Front and back rolls are parallel mounted in the bearing of frame. By means of reducer, driving gears, speed ratio gears, the motor drives the front and back rolls rotate toward each other so that rubber-cracking is begun. The rolls are made from chilled cast alloy iron; the inner of it is hollow. Steam and cooling water can pass through them so that the surface temperature can be adjusted. Its surface possesses higher hardness and fineness.
Roller bearing, copper bushing is fixed in the bearing base of frame. Back roll bearing bases are fixed up on frame, and the front roll-bearing base can slide in the guide-rail of frame.
Roll spacing adjusting is carried out by means of the reverse of hand wheel makes the thread rod drive front bearing base movement. The roll pin reduces when the hand wheel rotates clockwise, otherwise it will increase.
The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately.
Adjusting temperature device is two spray pipes with numeral rows of holes, extend the two pipes into the hollow roll, the holes are in the position of working section of the roll. The position of holes slants to 30 degree inner direction so that the spraying water and steam is directed at contacting angle of sizing material, this can control the surface temperature of roll.
3.Technical Parameters:
| XKP-400 | XKP-450 | XKP-560 | |
| Working diameter of front roller(mm) | Φ400 | Φ450 | Φ560 |
| Working diameter of rear roller(mm) | Φ400 | Φ450 | Φ510 |
| Working length of rollers(mm) | 600 | 760 | 800 |
| Serface speed of front roller(m/min) | 20 | 23.2 | 25.56 |
| Velocity ratio of rollers | 1:1.38 | 1:1.38 | 1:1.3 |
| Maximum gap between rollers(mm) | 8 | 8 | 8 |
| Capacity(kg/h) | 300 | 400 | 500 |
| Power(kw) | 45 | 55 | 75 |
| Dimension(mm) | 3950*1800*1780 | 4770*1845*1835 | 5064*2284*1978 |
| Weight(kg) | 7000 | 12000 | 19000 |
4.Pictures:
Waste Tire Crusher of Tyre Recycling Machine
5.Certification:
6.Load container:
Big in China Manual hydraulic hose crimping tool KG75
high pressure Hydraulic hose fitting locking machine
Chinese Hydraulic Hose Cutting Machine(QB-38)
customized frame type rubber plate vulcanizing press
high-profit automatic intelligent rubber cutter
tire crusher for scrap tire recycling processing Line