Tyre Retreading Machine

The whole tyre retreading line

1.Active mold curing machine

The tyres are placed in it and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.

2.Mould

3.Tyre grinding machine

The tyre's old tread is mechanically removed on high speed buffers. buffers are extremely accurate and will remove

the proper amount of old rubber while turning the tyre to an exact specified diameter and radius.

4.Tire tread building machine

In the precure system, the tread rubber has already been vulcanized with the new tread pattern design. The pre-cured tread rubber is then applied with the building machine.

5.Sidewall grinding machine

6.Glue Machine

7.Rubber extrusion machine

8.Wheel rim disassemble and installation machine

This is used to easily remove the steel rings, Pneumatic elevator, lift the tires easily

9.Multi-functional tyre repair machine

10.Hook

Benefits of tyre retreading

1. in cost aspect: The retreaded tire saves 50% at least compared to the new tire.

2. Reduced 70% oil consumption and 80% environmental pollution separately in the tire treating processes, extremely

environmental protection.

3. To produce a truck or bus tyre requires about 60-80 kg of rubber mixture. Retreading the tyre takes only about

15 kg of rubber.A considerable amount of raw materials can therefore be saved.

5. Safe durable, is equally matched with the new tire.

6. Exercises in the same legal speed, regardless of is the security, exercises the natural comfortableness, the retreaded

tire all does not have slightly the difference in the new tire.

7. The retreaded tire widely uses in the flight vehicle, the utilization ratio have reached 90%.