Two-component Extruder

Two-component Extruder, 1.xCharging basket:55Gallon(200L), 2.Curing agent basket 5Gallon(20L), 3.Mix ratio 6:1~14:1 - details see: https://www.machineto.com/two-component-extruder-10085352

Place of Origin:Shandong China (Mainland)	Brand Name:YUEFENG	Model Number:BST03	Curing agent basket:5Gallon(20L)
Squeeze pressure:20Mpa

Introduction:

The BST03 high-efficiency adhesive dispensing machine, whose key parts are supplied by international leading brand, has a good quality and reliability. The key functional parts are made of high-tension and quality stainless steel with thermal treatment, the reliability and durability of the machine are greatly improved, ensuring a fairly well quality of machine.

The material pump, curing agent pump and proportional pump high pressure valve of the machine are made of special leakage-free alloy by grinding. The proportional pump is installed with an adjustable proportioning mechanism; the nearly fastidious proportioning requirements of the bicomponent adhesive are fulfilled, as well as those of curtain wall glass and insulating glass.

The key parts can assemble with GRACO with good quality and reliability depends on customer requirement.

Technical Parameter:

Model	BST03
Mix ratio	6:1~14:1
xCharging basket	55Gallon(200L)
Curing agent basket	5Gallon(20L)
Beat rubber quantit	0.8m3/min
Squeeze pressure	20Mpa
Air pressure	0.5~0.8Mpa
Output	4~10L/min
Overall dimension	1100×950×2500mm