Home  >  Related Services  >  Machinery Design Services

Our factory is a professional manufacturer specializing in designing, making, installing and export of roll forming machines. - details see: https://www.machineto.com/touch-screen-making-machine-10365923

We are capable of designing machine as your requirement. We promise to provide you machine with best quality and best price.

Our roll forming machine can produce different kinds of steel panel tiles for roof and wall. The tiles is mainly used in temporary building site, steel constrcuture workshop,and other public building with fast building speed. It has advantage of pretty appearance, durable using and so on.

Technical parameters:

(1) Suitable material to process: color/galvanized sheet

(2) Thickness of the plate :0.3-1.0mm

(3) Roller: steps: 13 (change as per different machine); material :45# steel, Rolling chromium thickness:0.05 mm

(4) Diameter of active shaft: 70-95mm

(5) Productivity :8-12m/min

(6) Wall thickness of the main forming machine: 12/16/18mm steel plate

(7) Main forming machine body : Groove , H or shape steel (250mm-400mm)

(8) Transmission chain is25.4mm,;

Reducer is 5.5kw Xingxing Cycloid which works stably and no noise.

(9) Cutting hydraulic systerm adpats CDF-10 gear pump,the motor power is 4kw, no noise, work stably, long life expentancy.

Cutting tool material: GCr12 with quenched treatment 60-62

(10) PLC control systerm, easy to operate, high precision and work stably.

Note: all the parameters can be changed as per the custumers requirement and different machines.

Processing technique and deployment:

Processes: DecoilerRoll forming machinePLC systemHydraulic systempost cutOutput table

Components of line:

No.	Name	Unit	Qty
1	Decoiler	set	1
2	Main machine for roll forming	set	1
3	Control system	set	1
4	Hydraulic system	set	1
5	Post cut	set	1
6	Output table	set	1

4. Technical Specification

(1) Manual Un-coiler(Option Hydraulic un-coiler)

Un-powered; single head;

max.capacity: 5000kg;
Coil inner-diameter: 508mm

(2) Roll-Forming M/C:
Steps:13 Roller Material: 45# steel

Voltage:380V/50Hz. line speed:3-6m/min;

Rolling chromium thickness:0.05 mm

(3)Pressing Die:

Stop to press, Post to press

Press tool material: 40Cr and heat-treated

(4) Cutting Mechanism

It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.

Match equipment : one set of cutting tool, one hydraulic tank ,one cutter machine.

Stop to cut , Post cut cutting length tolerance: ±2mm

Cutting tool material: GCr12 with quenched treatment 60-62

(5) Hydraulic System

It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.

Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.

Power of the oil pump: 3kw Hydraulic oil :40#]

(6)Computer control cabinet :

It adopts Taida PLC to control. The target piece length is adjustable and digit of it can be adjusted

Computed mode has two modes: automatic and manual one.

(7)Counter :

One counter gauges length, pulses, and decides length