Home  >  Raw Material Processing Machinery  >  Rubber Product Making Machinery

1.tire retreading,curing chamber, 2.retreading tire from 9.00R20 to 40.00R57 car/truck/OTR tires, 3.easy/safe handing&operation - details see: https://www.machineto.com/tire-retreading-machine-recapping-machine-curing-chamber-10339134

Cold tire retreading machine

Retreading various sizes tire, from 9.00R20 to 40.00R57, car/truck/OTR tires
Special and advanced design for tire retreading
Competent After-sales Service
3.easy/safe handing&operation

1.Inspection: Choice the better tyre .The surface of the tyre must be intact ,both the sides should not have oversize mangler.

2.Drying Clean the tyre ,then dry it .

3.Buffing After drying,the tyre's old tread is mechanically removed on high speed buffers.

Then people make second polishing and section repairs.

4.Building-tread rubber The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area.

The pre-cured tread rubber is then applied with the Tire Surface Press Fit Machine

5.Enveloping The built tyres are then mounted with envelops and rims to prepare them for curing.

6.Fixing steel ring After enveloping the tire,fix them on the felly on the working platform.

And they are ready for being made vacuum and vulcanization.

7.Curing by pre-cure pots.The tyre is then placed in a pre-cure pot and pre-cured tread becomes adhered to the tyre through a vucanizing process.

8.Final inspection The retreaded tyre is subjected to a final inspection.This inspection insure that only tyres that meet industry qulity standards are allowed to leave the retread plant.

JC-4 Tires vulcanizing tank 3mx4m

Temperature: 117°C Cure pots pressure: 0.5Mpa Envelope set pressure: 0.3Mpa Inner tyre pressure: 0.7Mpa Voltage: 380V, 50/60Hz Power: 42/36kw Heating way: electricity heating

12 pcs Curing Chamber

Car tire curing chamber

Light truck tire curing chamber

Tire grinding machine With hand buffing device

Motor power: 15kw Tire turn motivation: 0.75kw Voltage: 380V, 50/60Hz Power: 19kw Working air pressure: 0.1-0.15Mpa Weight: 2400kg Specification: 25''-28''

Tread building machine

Capping motor: 0.85-1.1kw Protection grade: 1p44 Press motor: 550W Voltage: 380V, 50/60Hz Power: 2.2kw Working air pressure: 0.1-0.15Mpa Weight: 1200kg Specification: 25''-28''

Extrusion winding machine

Screw dia.: 65mm Motor power: 22kw Voltage: 380V PLC control

Finally get the tire