Tablet Press Machine

-------------------------------------------------------------------------------------------

THE MACHINE IS HAVING FOLLOWING MAJOR SALIENT FEATURES : -

• This machine is built on GMP directives & robust construction.
• All Contact parts of the machine is made from SS 316 Material.
• Main Motor is fitted with center gear box system which minimizes wear & tears and noise level of the machine.
• Main Motor is provided of standard make Bharat Bijalee / Crompton Greaves.
• Main motor drive/ turret speed is controlled by AC variable frequency drive.
• Special Grade Cast Iron is used for Turret.
• Electro Less Nickel Plating is provided on Turret to improve life & prevent rusting of turret.
• All upper guard is manufactured from Acrylic Sheet and self locking arrangement for fitting of Upper Guard.
• Needle Roller bearing is provided on bottom side of turret which helps free running of the turret.
• Single Phase Preventer is provided to prevent reverse direction running of the machine.
• Pre-compression Arrangement: The machine is provided with pre-compression arrangement as a standard features. Which enhance the compression capability of the machine in case of low density powder & reduce the capping problem in the tablets.
• Upper Punch Penetration: The machine is provided with upper punch penetration as a standard features. Which allows tablet compression in the entire length of die. It also facilitates easy ejection of tablets in case of difficult granules.
• Outside Controls: The machine is having all the controls outside of the machine.

1) Tablet weight control

2) Tablet Thickness control

3) Tablet lower pre compression control

4) Upper punch penetration

• Lubrication System: Main Gear Box is enclosed type and duly emerged in lubrication oil. For lubrication of upper & lower pressure roll pin, pre compression pressure roller, fork & other moving parts grease nipples are provided. For upper punch lubrication oil cup is provided.
• Electronic digital tablet counter cum rpm meter and cumulative output indicator is provided on the control panel.
• All upper guard interlocks is provided as a safety function.
• Force Feeder Assembly is providedoptionally.

TECHNICAL SPECIFICATIONS

-------------------------------------------------------------------------------------------

Number of Station : 10

Type Of Tooling : B

Output tablets / hour : 19,800 (Maximum at 33 RPM)

Max. Operating Pressure 6 Tons

Max. Tablet Diameter : 16 mm

Depth of Fill : 17.5 mm

Upper Punch Penetration : 2 – 6 mm

Main Ele. Motor : 1.5 K.W. / 2 H.P., 3 Phase, 1440 RPM, 50 Hz

Overall Dimension (cm) : 48 x 67 x 105

Net Weight : 365 Kg.

Gross Weight : 550 Kg.