STRAW AND HAY SHREDDER WITH CONVEYOR SS -D180A

The shredder is designed for shredding and milling straw or hay pressIn certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa. The finer the sieve is, the higher is the kg/h throughput of the shredder, and vice versa. The user should select these parameters according to desirable result of throughput and fraction ratio.

Machine SS-D180A ,is made exclusive - with eliminator for stones and other things from milling zone.

The shredder with the conveyor is adjusted for the operations described in the manual in usual operation conditions. If the shredder is used for other works or in potentially dangerous conditions, the manufacturer assumes no responsibility for the consequences of operation. In case of adverse conditions of operation, it is necessary to contact the manufacturer of the equipment or its representative.

ed in rolls or rectangular bale .

Specifications of the shredder - mill

throughput 700 - 1200 kg/h

shredding fraction 10 - 15 mm (subject to sieve)

dampness of the product to be shredded >14 %

fitting roll diameter max 1700 mm

fitting roll length max 1200 mm + 600 mm

noisiness 77.8 dB +/- 5dB

output pipe diameter 200 mm

length 3500 mm

width 2300 mm

height 2830 mm

weight 750 kg

power supply 380V 50Hz

power 42.0 kW

current 80A

Specifications of the conveyor

length 4000 mm

width 1650 mm

height 1000 mm

weight 300 kg

power supply 380V 50Hz

power 1,1 kW

current 2,78 A