Straight Line Wire Drawing Machine

Straight Line Wire Drawing Machine

1. About us

Wuxi Pingsheng Science & Technology Co., Ltd. , one of the leading wire drawing machine manufacturers in China , is specialized in manufacturing wire drawing machines , which was established in 1985.

Our products are popular in many provinces of china and have already been exported to Vietnam , Indonesia,Uzbekistan,Etc.

Excellent geographic location and easy transportation access,only 2k meter from Wuxi airport and adjacent to national highway 312.Welcome friends of all industries to visit and instruct us.

Main products: Straight line drawing machine

Water wire drawing machine

Fine wire drawing machines(sawing wire drawing machine)

Vertical wire drawing machine

Combined wire drawing machine

Pulley wire drawing machine

Auxiliary products: Pay-off machine

Take-up machine

Welding machine

Sharpening machine

Lining machine .

We have a professional technical team, a good after-sale service team, an excellent production management team. We can design and produce various wire drawing machines, auxiliary equipment according to customers’ special requirements.

2. Application

It is applied for the production of Prestressing Strand, Steel Cord, Bead Wire, Steel Wire, Spring Steel Wire, Stainless Steel Wire, Gas Welding Wire, Arc Welding Wire,etc.

3. Feature

(1)The equipment contains the functions of human-machine dialogue, over-temperature protection for motor, alarm for abnormal water pressure, fault display.

(2)It’s kind of high-efficient machine with easy operation, high degree of automation.

(3)Between the drawing process without intermediate pulley and the guide wheel, it does not generate bending and torsion, and convenient threading

(4)Straight line drawing machine suitable for drawing large diameter, high strength and special shaped steel wire

(5As the use of the frequency technology, changes in the larger context of parts of the compression ratio to meet the wide range of technology and high speed drawing.

(6)There is no relative sliding between wire and capstan. The quality of finished wire is much better.

4. Description

Back

Our straight line wire drawing machine applies advanced international technology, with digestion and absorption, the drawing machine is applicable for high intensity and performance demand. The capstan diameter of the series products is 350-1200 mm with maximum inlet diameter of 14mm and minimum outlet diameter of 0.7mm.

The number of blocks depend on the inlet and outlet diameter of wire.

One drawing dies

Besides the finished rolls, all rolls about 8 ° tilt to keep the wire reel maximum amount of plot lines and wire straight toward. Tuning roller applying anti-pull the wire, to reduce mold drawing force.

The first several heads power by the AC frequency motor through high- frequency joint narrow V-belts, spread by the hardened reducer to capstan. And the other heads power by the AC frequency motor through two high-frequency joint narrow V-belt to capstan.

Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base (2 # -~# mode box) tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor output signal to fine-tune the speed of change. Tuning roller wire tension by adjusting the air pressure change, regulation range 0.15-0.6Mpa. The mold box is also equipped with a stirring device. Tuning roller side of the mold box, a gear reducer single-phase capacitance running motor through a sprocket, power passed to the stirring arm to stir the mold box, lubrication powder, without agglomeration affect lubrication.

The material is ZG45 steel, surface is build-up welded, the surface is brightness, smooth, wear-resistant surfacing height of 150mm, long service life; hub height of 150-200mm.

Siemens touch screen

Electric cabinet

Note: This equipment is manufactured in accordance with ISO9001:2008 standards.

5.Our services

1. We are always providing customers with not only the excellent solutions of steel wire production line, best related equipment and perfect services but also free technical services on the steel wire production line.

2. If you have any questions in the process of producing steel wire, or about steel wire production line, please feel free to contact us any time. Our solutions and quotation will be sent to you soon to meet you special requirements.

3. Welcome to visit our factory and Wire drawing production lines.

6.Successful experience / Markets

Be up to the international level. Our lines and related complete equipment have been exported to Southeast Asia, West Asia, Eastern Europe, South America, the Middle East, Russia, India, Indonesia, Morocco, South Africa, Algeria, etc.