Steel wire rod nuts and bolts cold heading
Price on request
Pricing is provided on request — use the quote form below.
- Port
- SHANGHAI
- Minimum Order Quantity
- 1 Unit/Units
- Supply Ability
- 100 Unit/Units per Month
- Payment Terms
- L/C,T/T
Price on request
Pricing is provided on request — use the quote form below.
Something wrong with this listing? Report it
1.Product:M3-M4~M18-M30·2.Slider stroke:80-200mm·3.Productivity(pcs/min):50-160·4.Motor power:3-55kw·5.Weight:1.2-40ton
| Place of Origin | Jiangsu China (Mainland) | high speed | Automatic |
|---|---|---|---|
| 1.Product | M3-M4~M18-M30 | 2.Slider stroke | 80-200mm |
| 3.Productivity(pcs/min) | 50-160 | 4.Motor power | 3-55kw |
| 5.Weight | 1.2-40ton |
| Packaging Detail | WOOD PACKING |
|---|---|
| Delivery Detail | 30 DAYS UPON ORDER CONFIRMED |
Features of Automatic nut making machine
The nut cold former is the ideal equipment for producing various kinds of nuts,with fully automatic process.
The blanks of six angle screws made by cold drawing height tray or the bar of stocks become bared six angle screws after tapping silk.
The machines of this series are all of floor style with work positions in level order. All the machine produces including the feeding of bars, parting, removing of finished work pieces, punching and cold-heating are in an automatic operation.
With the specialty of the right and secure locating and convenient operating, adjusting, repairing, packing and separating, they are the ideal equipment quality and stable production.
Machine Detailed Specifications form:
| Model | Product specification | Cold heading slider stroke (mm) | Productivity (pcs/min) | Motor power(kw) | Outer form size(mm) | Weight(about) |
| Z41-4 | M3-M4 | 80 | 160 | 3 | 1200×730×1035 | 1200 |
| Z41-6 | M4-M6 | 85 | 120 | 5.5 | 2395×1430×1230 | 3600 |
| Z41-8 | M6-M8 | 108 | 100 | 7.5 | 2560×1500×1350 | 4500 |
| Z41-10 | M8-M10 | 108 | 90 | 11 | 3200×1800×1500 | 5500 |
| Z41-12 | M10-M12 | 120 | 85 | 15 | 4200×2600×1600 | 9200 |
| Z41-16 | M14-M16 | 150 | 70 | 22 | 5020×2800×1800 | 15000 |
| Z41-20 | M16-M20 | 165 | 65 | 40 | 6000×2800×1800 | 20000 |
| Z41-24 | M18-M24 | 200 | 55 | 45 | 6500×3000×2000 | 28000 |
| Z41-30 | M18-M30 | 200 | 50 | 55 | 6800×3100×2100 | 40000 |
Usage: Make various fasteners especially for auto parts including the non-standard parts & special-shaped pieces etc.
Workshop View:
Steel casing workshop:
Cold forming machine safety operation guide:
1 Wearing gloves to operate cold heading machine is forbidden.
2 All fasteners must be carefully checked whether locked well before driving equipment, safety protection device is whether in good condition, and during working must always examine, prevent loose and cause an accident because of the violent vibration.
3 After the equipment adjusted, first open flywheel, inspect each working parts normal or not,take off pull rod of switch vehicles, and then start motor. It is strictly forbidden to start motor while switch.
4 All fault should be excluded before driving, first short time idle running,and then trial heading.
5 While in motion, the operator should stand in a safe place.Taking workpiece is forbidden at the concave and convex die place, only at the bottom can view products.
6 Carefully adjust the die and punch when replaceing products, , and careful check each part normal or not.
7 In the process of production, if there is failure, must immediately stop, find out the reason, eliminate hidden dangers. If the brakes are broken, it is strictly forbidden to drive.
8 Insurance plate (insurance rod) must add protective device, in order to avoid the fracture accident. All protective device shall not be arbitrary remove, lost.
Company Information:
