Six-station Extended length Part Former machine set

6-station Automatic Extended type Cold Forming machine

The body of the machine is molded with nodular graphite steel with good tensile strength and wear resistance.We take the V-shape design for the main slide table and take clamping plate at both sides. so we can guarantee the high precision and stability of the main slide table under the long term and high speed movement.

Take S-shape flange for blanking system, the cutting guide plate center is in consonance with the cutter drum center, and the cutting force can be transmitted at one line, which can get the maximum cutting force and most stable cutting.

The machine is equipped with pneumatic brake with flexible in-ching and convenient debugging.Equipped with automatic fault detector and security protection device, the machine can stop automatically when having fault.Install the non-return device for feeding, and so increase the feeding precision.

1.The bearing is used to assort the crankshaft and bed to ensure the flexible operation of adopted to cooperate the crankshaft, while the alloy brasses areadopted to cooperate the crankshaft with the percussion rod, therefore the percussion-bearing is high,friction-resistance is goodand the operational life is long.
2.Enlarging the eccentriciry of the crankshaft and lengthening the T-type slide and bed anc using the real stuffs, therefore it isespecially suited for the production of longer-shaped products.
3.Being cast by adding the nodular cast iron with alloy contained in the bed, therefore possessing high tensile strength and favorable wear-resistance.
4.The side of main slide adopts the adjustable design to ensure the operation accuracy under the long-term usage.
5.The cropping system uses the guide board to drive the cutting holder, and the guide board reciprocates and the cut off force transmits directly,which is kind of high-powered, stable and good dynamic balance.

6.Punch liftout system can be added to meet the production demand of the special fittings according to the recquirement.
7.Based on the products’ feature, stop gauge will be added to improve the feeding accuracy.
8.The stable,reliable and mechanical equipment will be added according to the requirement.

9.The pneumatic clutch brake apparatus will be added accordinci to the requirement to lessen the concussion, start the electric current and protect the electric appliances and motor.

Machine Detailed Specifications form:

Usage: Make various fasteners especially for auto parts including the non-standard parts & special-shaped pieces etc.

Workshop View:

Steel casing workshop:

Cold forming machine safety operation guide:

1 Wearing gloves to operate cold heading machine is forbidden.

2 All fasteners must be carefully checked whether locked well before driving equipment, safety protection device is whether in good condition, and during working must always examine, prevent loose and cause an accident because of the violent vibration.

3 After the equipment adjusted, first open flywheel, inspect each working parts normal or not,take off pull rod of switch vehicles, and then start motor. It is strictly forbidden to start motor while switch.

4 All fault should be excluded before driving, first short time idle running,and then trial heading.

5 While in motion, the operator should stand in a safe place.Taking workpiece is forbidden at the concave and convex die place, only at the bottom can view products.

6 Carefully adjust the die and punch when replaceing products, , and careful check each part normal or not.

7 In the process of production, if there is failure, must immediately stop, find out the reason, eliminate hidden dangers. If the brakes are broken, it is strictly forbidden to drive.

8 Insurance plate (insurance rod) must add protective device, in order to avoid the fracture accident. All protective device shall not be arbitrary remove, lost.

Company Information: