Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Plastic Welders

Single-Head High Frequency Welder for PVC Blister sealing Strong Electric Power Output, Pneumatic, CE - details see: https://www.machineto.com/single-head-high-frequency-welder-for-sale-pvc-blistering-10140179

Single-Head High Frequency Welder for sale PVC Blistering

High frequency PVC welding machine

High efficiency

Blistering Sealing and Embossing machine

Pneumatic

Strong Electric Power Output
Pneumatic

1.Application

Single,double sealed blister packaging, toys,stationary,sports goods, glasses case, leather trademark, car seat,door panels, etc.

2.Basic operating principles

This machine is a high frequency device, whose self-exited oscillator of the electron tube can produce high frequency electromagnetic field. And the plastic to be processed is in the high frequency electromagnetic field between the upper and low electrode. When its interior molecules are polarized and produce heat automatically by mutual movement and friction, it will be welded with the pressure of the die.

model	RG-4000S	RG-5000S
H.F.Power	4000W	5000W
Input Power	7KVA	8KVA
Power voltage	380V 50HZ-60HZ	380V 50HZ-60HZ
Frequency	27.12MHZ	27.12MHZ
Rectifier	Silicon Diode	Silicon Diode
Oscillator	7T62RB	7T85RB
Way of pressure	Pneumatic	Pneumatic
Gap of electrodes	250mm	250mm
Machine Movement Distance	175mm	175mm
Plate Size	400×600	400×600
Dimensions	1000×1600×1730	1000×1600×1730
N/W	400kg	400kg

3.Machine maintenance

a,Add oil lubricant in each function parts every several days, and often wipe cleanly.

b,To cleanout and lubricate each parts of the machine every half year, clear away the dust in the parts of transformer, high voltage capacitor, blower fan and Resonant Cavity.

c,If the aluminium pan of the output adjusting capacitor and the capacitor in the side of resonant cavity, was ablated by caustic caused by dust or eyewinker, the caustic surface should be repair flatly and smoothly in time.

4.Notice

A,When new machine is on use or replace the new electron tube, after bootstrap, pls make the electron tube warm up about 15 minutes, then put into operation, to reduce the warming up time gradually within one week, so as to promise and extend the service life of the electron tube.

B,When operation, it is prohibited to make the anode and cathode immediate contact, to avoid the work damage caused by the short circuit

C,When welding, ban to touch the electrode, conducting strip and mold, to avoid burning skins.

D,It’s the high-voltage electrode in the machine, when maintance and reparing, make sure to pull down the knife switch to ensure safety.